Announcement

Collapse
No announcement yet.

Auto to manual conversion question.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Auto to manual conversion question.

    I've seen the walk throughs and wiring diagrams on what to do with the manual swap wiring to get the car to start/reverse lights to work.

    Do I need to get the wiring off a manual transmission to be able to patch into my cars wiring? I have a getrag 245 and it has a reverse switch on it, but it didn't come with any wiring.

    Thanks gang.

    #2
    Yes, or just make up the wires. It only takes 2.

    A G245 from an E21?

    t
    now, sometimes I just mess with people. It's more entertaining that way. george graves

    Comment


      #3
      You can actually just delete the auto trans harness or make a jumper
      Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

      https://www.r3vlimited.com/board/sho...86#post4944786
      Alice the Time Capsule
      http://www.r3vlimited.com/board/showthread.php?t=360504
      87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

      Comment

      Working...
      X