M60b44 #

[driftingminor913]

Well I bought these heads of some guy on Craigslist, who had them in the back of his 740. There about 35.00 new but I have a shop theta letting me
Buy them for 16 each

[Jean]

Interesting, I haven't seen a collapsed lifter yet with 4 m6x's so far. How much are they new?

[driftingminor913]

You plan on using aftermarket cams or going with stock cams?

What was wrong with the stock lifters?

You the stock 4.0 cams, and they where all collapsed except 8. Which where the only one I could save when I tried to revive them

[Jean]

I had then ported to the max mostly intake then exhaust, valve work and the regular stuff for getting heads done. And yeah the lifters that came with the heads where done for :-( so I'm going to buy new ones instead of going JUNKYARDING haha I'm really hoping to get at least 350-370 with a tune "fingers crossed"

You plan on using aftermarket cams or going with stock cams?

What was wrong with the stock lifters?

[Jean]

george - I shipped m62nv heads w/o cams last week and they were about 36-37lbs each.

[driftingminor913]

The wiki for m60 says the heads are 50-60lbs each?!?!? Is that true? Or did I mis-read something?



http://en.wikipedia.org/wiki/BMW_M60

I feel like that's a exaggerated statement. Cause I carried them into my apartment stacked on each other wrapped up and it felt like 60lbs of aluminum

[george graves]

The wiki for m60 says the heads are 50-60lbs each?!?!? Is that true? Or did I mis-read something?

The block weighed 25 kg (55 lb),{ and the heads 30 kg (66 lb) each

http://en.wikipedia.org/wiki/BMW_M60

[driftingminor913]

What did you have done to the heads? Ouch 32 new lifters?

I had then ported to the max mostly intake then exhaust, valve work and the regular stuff for getting heads done. And yeah the lifters that came with the heads where done for :-( so I'm going to buy new ones instead of going JUNKYARDING haha I'm really hoping to get at least 350-370 with a tune "fingers crossed"

[Jean]

So I got these back today, ordering new lifters an then the motor can be ASSEMBLED!

What did you have done to the heads? Ouch 32 new lifters?

[driftingminor913]

So I got these back today, ordering new lifters an then the motor can be ASSEMBLED!

[kcdubber]

Those the arms you dipping in 24k??? PFFTT!

[driftingminor913]

Sooooooo I got home today and this was at my doorstep


I just looked at them an added it to my wall art of boxes

[driftingminor913]

Don't you dare do such a thing, cause I will come out an watch the burnout...then cry...then go kick my engine off the stand cause its not slaying tires

[dirty30]

Fixed.

I will powercoat another set of valve covers mirror finish arab gold, install them on my car, trailer my beautiful garage queen to your house and do a smoky V8 burnout in your driveway.

those gold valve covers are sick!

[JCarp90]