Announcement

Collapse
No announcement yet.

My M60 swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    My M60 swap

    Yes - you won't regret the z3m rad. Those three rows make a difference in keeping it cool.
    #aintcare......on the pic ?
    Last edited by Old city bimmer; 08-07-2014, 11:03 AM.
    sigpic
    323i MTEC1
    Z3 coupe
    E60 M5

    Comment


      Jack89i

      http://www.r3vlimited.com/board/show...&postcount=102

      What is the part number on those 90 degree fittings you've used ?

      Did they come with your wilwood masters ?

      I am asking because the ones I've gotten with the kit don't all want to align in the same direction once they are tight....and it's making it difficult to route the lines.
      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

      Comment


        Originally posted by Jean View Post
        Jack89i

        http://www.r3vlimited.com/board/show...&postcount=102

        What is the part number on those 90 degree fittings you've used ?

        Did they come with your wilwood masters ?

        I am asking because the ones I've gotten with the kit don't all want to align in the same direction once they are tight....and it's making it difficult to route the lines.
        I ran into that issue myelf...I just kept turning until they were all in the right spot. Nervwracking, but necessary in my case. Make sure you use Permatex Thread Sealant Jean.

        OBDI M62B44/6 swap
        Transaction feedback
        - jpod999

        Comment

        Working...
        X