Announcement

Collapse
No announcement yet.

M60b40 w 5speed. Clutch and flywheel?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    I personally went with the TTV which alloqws you to use the 240mm M3 clutch pack. I think it was $515 shipped from the UK. Very light weight too considering.

    Comment


      #32
      I'm using the stock 530 wheel and clutch. No issues what so ever.
      sigpic
      323i MTEC1
      Z3 coupe
      E60 M5

      Comment


        #33
        Also heard someone used a 530i flywheel n clutch and no slipping
        I've done about 2,000 miles on my M60b40 E34 5 speed conversion and so far there's been no slipping but I'm not hard on clutches and I do think it's getting close to the limit of the clutch assembly, it's adequate.

        Comment


          #34
          For those W the TTV & S50.....what clutch slave are you using?? My slave is not reaching the fork! :-(

          Comment


            #35
            Originally posted by 325est13psi View Post
            heres a picure of the TTV racing flywheel installed, great solution to this problem, it is steel but is still way lighter than the dual mass



            i havent gotten a e36 clutch yet but soon
            Hi i have ttv racing fw too on my e30 m62TU swap, but since i replace stock oem fw to this ttv racing one, my car doesn´t crank let´s check video->

            can someone help me with this issue?

            Comment

            Working...
            X