Installed the shorter masters, man what a pita it is to install still. I REALLY don't like the tight fit against the main chassis harness under the dash, I'd really recommend to wrap the section in good tape, to avoid getting the wire insulation failure against the bracket mount.
Tomorrow I'll have to remove it again, and make a couple adjustments, and drill the firewall for the 3 front mounting bolts.
Also, pretty sure the wilwood remote balance bar adjuster won't work when we are using the pedal box with the mounting bracket in the e30. The mounting bracket is in the way.
I need to upload a couple of pics to show what I mean, but pretty sure it's a no go.
Tomorrow I'll have to remove it again, and make a couple adjustments, and drill the firewall for the 3 front mounting bolts.
Also, pretty sure the wilwood remote balance bar adjuster won't work when we are using the pedal box with the mounting bracket in the e30. The mounting bracket is in the way.
I need to upload a couple of pics to show what I mean, but pretty sure it's a no go.
Comment