Fuel Injector with Broken Tip -- Useless?

[Tbolt]

just got mine in today, are they difficult to remove/replace?

tips appreciated!

[416stroker]

Post 7

[transatlantic0207]

is there a problem with taking the pintle cap (tip) off of an injector from a car in the pnp to replace a broken one?

[Tbolt]

just got my pintle caps in from rc eng but I think they sent me the wrong ones. Mine are like this but in blue:


but the pintle caps that are on my injectors look like this:

http://cgi.ebay.com/ebaymotors/BMW-Fin-Style-Fuel-Injector-Pintle-Cap_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem53d8057a6cQQitemZ360106523244QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[416stroker]

They sent you the ones like the ebay link? If they did it will work and have a better spay pattern than the brown one in the pic.

[416stroker]

is there a problem with taking the pintle cap (tip) off of an injector from a car in the pnp to replace a broken one?

Your welcome to try. But your better off buying new. They are more than likely going to break. They get brittle over time.

[Tbolt]

They sent you the ones like the ebay link? If they did it will work and have a better spay pattern than the brown one in the pic.

no they sent me the brown ones (but they are blue)

i knew i should have just got the fin-style ones from ebay

[416stroker]

Ship them back and get the design 2's off ebay. But I think they might still work. Some one correct me if I'm wrong

[Tbolt]

so i took out my injectors for the 1023 time and replaced the fin-style pintle caps with blue non-fin style pintle caps. it was a pain in the ass but it was worth it. however when putting the injectors back I must have broken one of the top seals because it is SPRAYING fuel hard from the top. where can i get a new seals? is there any place local I can get them so I can try to fix it today? dealer maybe?

today was a great day, car started up and idle'd smoothly for the first time in months =D

[rodrigo]

https://www.cruzinperformance.com

[416stroker]

so i took out my injectors for the 1023 time and replaced the fin-style pintle caps with blue non-fin style pintle caps. it was a pain in the ass but it was worth it. however when putting the injectors back I must have broken one of the top seals because it is SPRAYING fuel hard from the top. where can i get a new seals? is there any place local I can get them so I can try to fix it today? dealer maybe?

today was a great day, car started up and idle'd smoothly for the first time in months =D

Go to any parts store and if they don't have them have them check for 5.0 mustang injector o-rings

[moatilliatta]

Try and get ones from a mustang. I believe most Bosch injectors are the same.


I got mine at autozone.

Edit: What he said.. /\