new wheel horn stays on

[crazyvwobie]

I just put a sparco wheel and hub on my airbag 91 and when the ignition is on horn stays on but works like it suposed to with the stock wheel. anyone have any ideas ?

[xxx-Lost-Soul-xxx]

Did you make sure the Horn wire is in the right plug? I had the same issue with a Momo wheel.

[Dj Buttchug]

you have it wired wrong. One wire goes to ground the other goes to power. If you wire it backwards when you bolt everything up it automatically grounds the 12v and your horn turns on.

[crazyvwobie]

you have it wired wrong. One wire goes to ground the other goes to power. If you wire it backwards when you bolt everything up it automatically grounds the 12v and your horn turns on.

the sparco only comes with 1 wire and i put it to the ground on the horn.Do I need to add positive wire and what does it conect to? thanks guys

[hurttech]

the sparco only comes with 1 wire and i put it to the ground on the horn.Do I need to add positive wire and what does it conect to? thanks guys

The one wire should go to the button postive, im pretty sure the button grounds through the wheel/hub.

[evil_twin]

It does. Make sure that wire doesn't touch anything either. I had that problem on my steering wheel.

[crazyvwobie]

The one wire should go to the button postive, im pretty sure the button grounds through the wheel/hub.

so the contact on the hub is positive and then i need to add a ground?

[crazyvwobie]

It does. Make sure that wire doesn't touch anything either. I had that problem on my steering wheel.

I can put the wire on either and still the horn just goes off even with the horn button mounted.I can take the wire and touch the colum and has no effect.

[b*saint]

My weapon has no effect.

[ROLLingKING]

what ever came of this??
im trying to install my horn and when i hook up the ONE wire thst i have with the momo hub nothing happens when I push the horn

if i touch the wire to the steering hub tho it goes off...i dont understand what is supposed to be hooked up to what....why not just provide instructions when you pay money for shit. i dont need a thank you letter for choosing momo. fuck

[e-durty]

your steerign wheel is installed incorrectly, basically its on to tight and it is using the steering wheel as a button for the horn.

[ROLLingKING]

nvm
used a paper clip and twisted it to one of the connectors on the back of the horn and then twisted it around a section of the inside of the hub.
i put the single wire on the other connector on the back of the horn and presto!

[ROLLingKING]

your steerign wheel is installed incorrectly, basically its on to tight and it is using the steering wheel as a button for the horn.

i torqued it to spec tho..
it worked with a paper clip..and when I called momo they said there should be 2 wires..they told me to call turner or VAC.lol what a joke

[ROLLingKING]

paper clip