Bad oil leak?. Look at picture.

[Farbin Kaiber]

Go to PepBoys, spray can, orange cap, called Engine Brite. Or, just ask for a similar product.

[SacE30]

Go to PepBoys, spray can, orange cap, called Engine Brite. Or, just ask for a similar product.

Ok thanks

[SacE30]

Well im dropping my e30 off tomorrow, because of the oil leak and horrible vibration and noises coming from underneath the car. Was told it was the pilot bearing. I have some pics of where its coming from. the assembly connected to the oil filter. and the gasket that was just changed has a crack.

[SacE30]

[Huff]

WOW.. Yes, the best thing for you to do is have someone else look at this. Good luck man!

[SacE30]

WOW.. Yes, the best thing for you to do is have someone else look at this. Good luck man!

good news, he got it fixed today, no more leaking!

[keobs1]

what was the problem, i just found out mine is leaking after runing only, look like it drops a few drops after driving then it stops. Oil level is fine, Looks like i gatta take mine in too, i dont have a place or parts to lift it. =(

[SacE30]

what was the problem, i just found out mine is leaking after runing only, look like it drops a few drops after driving then it stops. Oil level is fine, Looks like i gatta take mine in too, i dont have a place or parts to lift it. =(

It was the oil filter housing, the thing with mine was it would just keep dripping. It would not stop, im glad i got it fixed though. Had to clean it up everyday!

[SacE30]

Sooooo i Just learned its not a good idea to put J-B weld on a hot/warm oil pan. FUUUUUUUCCCKKk, IT WONT DRY!!!

[glnr13]

1. jb weld doesnt play well with oil, clean the surface so that there is 0 residue.
2. it takes 6 hours for jb weld to set

[SacE30]

1. jb weld doesnt play well with oil, clean the surface so that there is 0 residue.
2. it takes 6 hours for jb weld to set

I wipe off the surface, But its constantly leaking. once i wipe it off it will come back

[SacE30]

Does anyone know of anything like Jb weld that is stronger and drys faster! please let me know as soon as possible, trying to fix this now.

[Danny]

LOL this is fun to watch.

[SacE30]

LOL this is fun to watch.

its not fun for me to watch oil seep threw the jb weld! there has to be something the drys quicker than this shit.

[glnr13]

nothing will work the way you're trying to do it.

best option: get a new pan
ok option: take that pan off, empty, clean, dry, weld
temporary fix option: take that pan off, empty, clean, dry, apply, let cure

do it right, do it once applies here