My power locks refuse to work on my car. Note, I own a 1988 325i convertible. Any suggestions or any places to look to diagnose the problem?
Announcement
Collapse
No announcement yet.
Power Locks / Central Locking System
Collapse
X
-
The first thing I would try is cleaning out the door jamb connectors with some contact cleaner and/or replacing corroded terminals. next check the fuses for the central locking unit. Try locking the car from the drivers door and then the trunk. All doors should lock, if one doesn't lock/unlock you could have a bad actuator. If nothing happens at all I would try another central locking unit."I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
-
new actuator is $70-80, its located in door right about 6 inches below the keyhole.
Its a bitch to get to so I hope you have skinny arms. I had issues where I couldnt lock drivers/passeger door even by force. Just replaced my drivers actuator after checking everything else and that solved problem Have to replace my passengers also.
Also check your central lock mech.
Note. the actuator for a cabrio is DIFFERENT from a hardtopRenting my rear wheel bearing tool kit. SIR
http://i25.photobucket.com/albums/c5...ps6debf0b0.jpg
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
-
try replacing the relay for the central locking that is located behind the driver side speaker panel.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
---------------------------------
89 E30 S52
---------------------------------
Transaction Feedback.
Comment
-
There's another relay???
FFFFFFFFFFFFFFFFFFF... :hitler:
I already tried using a new central locking unit that I got from the jyard. Worked on my friends car but not mine. :/
When I took the panel apart again, I noticed some disconnected cables. Not sure where they plug into so I left them alone. That may or may not be the culprit to why my power locks won't work.
Comment
Comment