Modify windows so they go all they way down?

[Herr Faust Schinken]

Are they interchangeable?? and I thought 88+ was a late model, and I have an 88...

so do i , i have early regulators so you do too

[einstein57]

Iirc the early cars use a different regulator that doesn't allow the windows to completely go in the doors. The late models use a different regulator that allows them to sink completely in the doors.
That's the way it is on my cars. M3 doesn't go in all the way, cabby does.

I dunno

Do verts and coupes even use the same glass and regulator?

IIRC my windows go all the way down

[oldmann]

This is an easy one, Remove the door panel, lower the window all the

way, look for the plastic block that stops the window at the bottom,

remove the block and remove as much material as you need to get the

window down all the way, don't remove too much at a time.

Got tired of the dent in my elbow/arm and dug into it, not a difficult task.

91 318i by the way.

[slippery]

Will be trying this next weekend. Thanks for the tip,

J

[vpilarrt]

If its a late model be aware that the plastic block is on the back side of the drive mechanism. Its held on by a bolt that is visible on the front side in a slotted hole but the slot doesn't give you enough adjustment to allow the window to go down far enough. Do not remove so much material that the top edge of the window goes below the seal on the door.

[nando]

my late model windows go all the way down?

[kamotors]

my late model windows go all the way down as well. but in my friends 85 and 88 E they dont go below the black trim piece and they cut into your arm.