I originally was going to get the Spectra Premium BM1B Ni Terne Tank for 227 but I found this eBay one for only 183. What are your opinions?
Announcement
Collapse
No announcement yet.
Need a new Fuel Tank
Collapse
X
-
My dad and I replaced the tank in the '89iX and '90iX with the one from rockauto. The mounting points were fairly close but not exact so we couldnt use the rubber grommets. I'm not sure if this one is the same as the rockauto one but it looks the same. Just make sure you clean the outside with a real good degreaser and paint it with rustoleum and then coat the sides and bottom with that rubber undercoating. The one from rockauto only came with one hardline (the one welded to the tank) so we replaced the other hardlines with rubber fuel line so we didnt have any rust issues again.FS NY: two Audiobahn A235HC amps and audiobahn 1farad capacitor
Saab/GM tech2 programming
My for sale thread
1990 325iX for sale or part out
Did you buy something from me? Please leave feedback!
Originally posted by K20RI_211And I have to ask if you make a hobby out of thread-bombing with retarded questions?
-
I bought a spectra one from the link below a couple weeks ago, think it was 225 shipped and was at my door in 3-4 days. Fitment was good, but test fit all of your hoses. The big evap hose outlet was a little bit too big, which was a PITA to find out once you have the tank back in the car.
88 325is - S52 powered
Originally posted by King ArthurWe'll not risk another frontal assault, that rabbit's dynamite!
Comment
-
i would say powder coating is too damn thin. Powder coating is more of aesthetics to make shit look pretty.FS NY: two Audiobahn A235HC amps and audiobahn 1farad capacitor
Saab/GM tech2 programming
My for sale thread
1990 325iX for sale or part out
Did you buy something from me? Please leave feedback!
Originally posted by K20RI_211And I have to ask if you make a hobby out of thread-bombing with retarded questions?
Comment
-
Originally posted by barbierij View Posti would say powder coating is too damn thin. Powder coating is more of aesthetics to make shit look pretty.
Comment
-
POR-15 makes coatings for gas tanks, inside and out.1991 325i - "Scambles" The Daily Driven lightly modded.
1988 Mazda RX-7 TII "Mako" The Free Dorito
bacon by Jared Laabs, on Flickr
Comment
-
Can you take a picture of the 63L tank when you receive it? Hard lines, top side and bottom side? I am looking at replacing my leaky 55L one with a 63L one from the later model M20 cars (and incidentally the M42 convertible E30). It looks like the fuel lines are in different places. What's the deal with the bottom connecting pipe? The 55L tank has the pipe connecting the sides, but it looks like the 63L tank does not. Those don't use two separate pumps, so how does fuel get from one side to the other?
Comment
-
Originally posted by bmwman91 View PostCan you take a picture of the 63L tank when you receive it? Hard lines, top side and bottom side? I am looking at replacing my leaky 55L one with a 63L one from the later model M20 cars (and incidentally the M42 convertible E30). It looks like the fuel lines are in different places. What's the deal with the bottom connecting pipe? The 55L tank has the pipe connecting the sides, but it looks like the 63L tank does not. Those don't use two separate pumps, so how does fuel get from one side to the other?
#AZE30
1991 318i
1989 325i
1989 335i
Comment
Comment