Late model cluster to early eta car

[mcdougal]

Just put an s52 in my early model eta car. My car has a Motometer cluster in it right now and I have a late model Motometer cluster with the 7k tach. From what I've read it sounds like I can swap the late model cluster to my car and everything will work other than the fuel gauge, which I will need to reuse from my early cluster? Is this correct?


Sent from my iPhone using Tapatalk

[PimpinWalrus]

Pretty sure everything should work except for the tach and econometer. They need to be spliced into the harness from the c104 connector in the glovebox.

[mcdougal]

The tach in my current cluster is working as it has been spliced into the c104. What I'm trying to understand is if I can swap a late model cluster into an early model car.


Sent from my iPhone using Tapatalk

[Gregs///M]

Just put an s52 in my early model eta car. My car has a Motometer cluster in it right now and I have a late model Motometer cluster with the 7k tach. From what I've read it sounds like I can swap the late model cluster to my car and everything will work other than the fuel gauge, which I will need to reuse from my early cluster? Is this correct?


Sent from my iPhone using Tapatalk

Yup, that is exactly right. You will need to make sure there is a coding plug in the front right corner of the cluster. Should be PN ending in 468.

Swap your fuel gauge and you're good to go.

[mcdougal]

Awesome thanks!


Sent from my iPhone using Tapatalk

[AndrewBird]

As long as your car is an 87 or later, it will work fine. More info here:

http://www.r3vlimited.com/board/showthread.php?t=71266&highlight=cluster

[mcdougal]

As long as your car is an 87 or later, it will work fine. More info here:

http://www.r3vlimited.com/board/show...hlight=cluster

I have an 86


Sent from my iPhone using Tapatalk

[reelizmpro]

It will work...just swap the fuel gauge.