e30 steering rack o-rings

[zaq123]

Does anyone know what size or part number for o-rings on the pressure equalizing line (plastic black line)? Thank you

[zaq123]

no one?

[glnr13]

http://www.realoem.com/bmw/enUS/show...diagId=32_0186

[zaq123]

http://www.realoem.com/bmw/enUS/show...diagId=32_0186

I'm talking about o-rings that go on #1 (plastic line) in the link
http://www.realoem.com/bmw/enUS/show...diagId=32_0045

[TobyB]

Oh, the crush washers?

Measure the banjo bolt stem, then get them by size.
I don't know, I have an assortment I inherited decades ago,
and just grab whatever fits.
10mm? 12mm.

They are reusable, too, if they're not too squashed.

t

[uturn]

Looks like a 1mm cross section, 9mm ID and a 10mm or 10.5mm OD.

[zaq123]

Oh, the crush washers?

Measure the banjo bolt stem, then get them by size.
I don't know, I have an assortment I inherited decades ago,
and just grab whatever fits.
10mm? 12mm.

They are reusable, too, if they're not too squashed.

t

There is an equalizing plastic line on the rack (so boots don't collapse/expend when rack is in motion). The line is #1 in the pic. That line has 2 fittings with rubber o-rings. That the o-ring I'm looking for.

[zaq123]

Looks like a 1mm cross section, 9mm ID and a 10mm or 10.5mm OD.

Thank you