Anyone have the E30 to E36 power window switch write-up?

[Jand3rson]

And they sit just about flush with the console. Not to mention they look a hell of a lot better.

[e30sd]

here

right click and "save as"

http://members.roadfly.org/e30sd/E36+Switch+Install.pdf

[spencers]

Thanks!

I mirrored it on my server just in case yours goes down or something :)

right click and save as

http://www.spencersaulsbury.com/images/E36+Switch+Install.pdf

[KenC]

You can't read the diagrams in the pictures; the resolution is so low.

[Sean]

Cool i like rocker switches, can you make them one touch? Also, i took my switches apart and turned the buttons around so the arrows face eachother. It confuses people.

Brian

I was wondering the same exact thing - CAN we get the one touch buttons working?

[KenC]

Cool i like rocker switches, can you make them one touch? Also, i took my switches apart and turned the buttons around so the arrows face eachother. It confuses people.

Brian

I was wondering the same exact thing - CAN we get the one touch buttons working?

You can get them working; but not by just changing the switch. I've seen one-touch upgrades at BavAuto for ~$50 each side.

[bimmerphile]

Cool i like rocker switches, can you make them one touch? Also, i took my switches apart and turned the buttons around so the arrows face eachother. It confuses people.

Brian

I was wondering the same exact thing - CAN we get the one touch buttons working?

You can get them working; but not by just changing the switch. I've seen one-touch upgrades at BavAuto for ~$50 each side.

you can if you have the E36 control module, but frankly i'd go the bavauto route.

Ken, stop complaining ;)

[spencers]

approx how much would the switches with the white base, connector, bezel, and wire be for two of em?

I haven't seen any that meet those specs on ebay. Haven't seen any parts e36's as of late...

Looks to be a fun swap! I'm thinking of doing it myself.

[devarato]

how would one go about coverting from manual windows to e36???

before the flaming begins, im just curious!

[bimmerphile]

how would one go about coverting from manual windows to e36???

before the flaming begins, im just curious!

motors, regulators, wiring, switches, and I think some brackets for inside the door.

approx how much would the switches with the white base, connector, bezel, and wire be for two of em?

$30-$50 on the bay

[franz]

any can be made to be one touch, just requires modules, ~$25 each.

[motoyen]

can anyone email me the write up. it's not online anymore. Thanks
anthony at motoyen dot com

[MR 325]

Check here... http://www.r3vlimited.com/phpBB2/vie...ght=e36+window

But I just did mine yesterday and the writeup was not needed. All you need is but connectors, dikes, and crimpers. Oh, and both brown wires coming off the E30 wiring go to the one brown E36 switch wire.