Off center front wheel

[D-rock]

Hey guys I really need help on this.


I purchased this car with the five log swap already installed.

One year later I did a suspension over haul. I changed the suspension all the links control arms and what not, but now the wheel has seemed to be pushed back from where it was originally.

Maybe the pervious owner used an e46 control arm?

What I used.

e30 to e36 ground control suspension
e36 M3 96+ Arms
Off set arm bushing

Everything was purchased from Turner Motorsports so I doubt they sold me the wrong item.

Any help would really be great! Thanks in advance!

Here is a photo of how the wheel sits and the second photo is of the original control arm that came with the car.

[Cabriolet]

did you flip the new bushing around the wrong way?

[D-rock]

did you flip the new bushing around the wrong way?

I don't think so I even had a shop check it out while doing some other work and it looked fine.

[D-rock]

Any other suggestions?

[DTMbimmer07]

did u buy this car from eral or jackie?

[D-rock]

Yeah his name was Eral! Why?

[DTMbimmer07]

there 318ti control arms u need to get 96+ E36 M3 control arms. let me know if you have any other questions.

[DTMbimmer07]

just reread the thread. so u changed the control arms to m3 ones now? i know originally he had the 318ti controls on there and he bent them to make them fit where he wanted them too.

[einstein57]

Wow thats sketch. I'd look in to getting the 96+ fronts spindles and brakes. That should get you a lot closer to center.

[D-rock]

just reread the thread. so u changed the control arms to m3 ones now? i know originally he had the 318ti controls on there and he bent them to make them fit where he wanted them too.

Thanks for the reply! They don't look bent from the picture I attached or do they? I originally used e30 ones then I swapped them out to e36 m3 arms and I didn't see very much of a difference.

Wow thats sketch. I'd look in to getting the 96+ fronts spindles and brakes. That should get you a lot closer to center.

Is there a way to know if I already have these or not? I would hate to replace all this and be in the same place :/

Thanks

[Blackout]

Is there a way to know if I already have these or not? I would hate to replace all this and be in the same place :/

Thanks

96+ M3 knuckles have 907/908 Left and Right respectively stamped on the back. Check it. If it is anything else, its non-M.

[einstein57]

They also have ///M on the front of the brake calipers.

[D-rock]

I know for a fact that my calipers are not e36 M3, but is there still a chance I could have e36 m3 spindles? Will changing only the spindles to M move the tire that far forward?

[Blackout]

Your control arms are the problem. They are not 96-99 M3 part.
Also check check at the back of the spindle, like i said.
What numbers are on your control arms? Are they OEM?
Which offset bushings are you using?

Left is E36 M3. Right is E36.

[D-rock]

Your control arms are the problem. They are not 96-99 M3 part.
Also check check at the back of the spindle, like i said.
What numbers are on your control arms? Are they OEM?
Which offset bushings are you using?

Left is E36 M3. Right is E36.

Thanks for the reply!


They are OEM control arms but I do not remember seeing any numbers on them. I will check on that and the spindles in the morning. I doubt the spindles are M3 but I paid $200 a piece for the control arms I hope I didnt get screwed.


I am using these bushings
http://www.turnermotorsport.com/p-36...30-e36-z3.aspx

Thanks again!