RX7 caliper and bracket Roll Call

[einstein57]

Didn't you sell yours?

[Robert]

getting another set.

[einstein57]

I think you should just buy mine. Just run a 15mm spacer to bring the fronts out flush

[amazo]

I am noob at BBK (plus I am new to BBK) I am going to be installing my BBK and will need new rims and tires. I was hoping that 15 x 8 +25 would be able to fit 280mm kit. Here is a link to the rim I was looking at.

http://passwordjdm.com/Stance-Mindse...7345C2104.aspx

[Wild Ride]

Hello everyone. I am new to r3v. I wanted to know if my alpina 16x7 et28 wheels will clear the rx7 BBK or if I will have to get spacers. I am really interested in the kit. https://sites.google.com/site/e30bra...30_RX7_CORRADO

Anybody have success fitting these behind real 16" alpinas?

Here is an Idea lets get a printable template going to check wheel clearances.

Also what is the typical cost for machining the rotors 1mm to fit the hub?

[E30SPDFRK]

How far do the calipers stick out from the hub? Someone stick a tape measure on it and take a picture.

[pandaboo911]

Yes please somebody show how much they protrude from the rotors face (hub)

[thirdlobe]

Sorry for brining back an old thread but does anyone sell these kits anymore? Looking for my 91 318is.

[Wanganstyle]

Has anyone calculated the effective bias post 4 pot rx7 converion.w rear oem brakes?

Sent from my GT-N7100 using Tapatalk 2

[MonkeyMan]

I ordered the caliper brackets from these guys:

https://sites.google.com/site/e30brakesolutions/home/E30_RX7_CORRADO

and this might be a dumb question, but the other day I was trying to do a test fit to see if these things will clear my 15x7 et24 Euroweaves, and I couldn't get the caliper + bracket onto the spindle because the dust shield behind the rotor is in the way. Does this need to be cut down or removed for this to work??

[E30_pilot]

Yes you have to trim your dust shield.

[brent5631]

Has anyone calculated the effective bias post 4 pot rx7 converion.w rear oem brakes?

Sent from my GT-N7100 using Tapatalk 2

I calculated it to be 70/30 f/r

[Wanganstyle]

What was the original e30 f/r brake bias before rx7 calipers?

Have the setup just wondering what will happen when we go on track with it

Sent from my GT-N7100 using Tapatalk 2

[brent5631]

Original is 60/40. The bias is not ideal but is not terrible. I can lock up the fronts first.

[Luis325]

Fuck theres no way to fit my 16" redrilled style 5's with these brakes!!!!!??????