Massive BBK Wheel Fitment Guide

[robgoesvroom]

why go 8" when you can go 10" ;)

as Lee said..


those are gorgeous......

always always loved them. very proper, not ricey......


just wish they did a 57.1, 8 inch...et 20

[TheDirtyS54Thirty]

why go 8" when you can go 10" ;)

My dawg! Are you running a BBK? Hows the clearance inside the wheels?

[robgoesvroom]

No not running BBK yet, all stock brakes. Been eyeing these MASSIVE kits for a long time but haven't pulled the trigger

[Massive Lee]

Wondering if anyone has a Sport or Race kit fitted on these Jongbloed wheels. Maybe even on 15x8. It seems they are available in direct fit - 57.1mm hub and et15 or et25

https://philstireservice.com/shop/jrw-aero-pts-spec-e30/

[Mfever]

What is the largest kit that fits under Euroweaves? And do the kits still come with ap racing calipers?

[Massive Lee]

What is the largest kit that fits under Euroweaves? And do the kits still come with ap racing calipers?

Count yourself lucky if you ca fit something else than stock calipers under these wheels.

As far as I know, the 280x22mm Street kit will fit. That's it. The VW Corrado rotor is offset more inward than the e30 rotor, and the caliper is narrow.
Available in two configurations. VW Corrado G60 rotors, or two-piece rotors with alu hats

https://www.facebook.com/pg/Massive-Brakes-178417442267056/photos/?tab=album&album_id=921006024674857

What else is available for our e30?

https://www.facebook.com/pg/Massive-Brakes-178417442267056/photos/?tab=album&album_id=1094663683975756

The kit with an AP Racing caliper is a 300x32mm kit. No way it fits under your wheels. and it is very expensive as calipers only will cost you $1200.00usd for the set ;-)

[Mfever]

ahhh rats! I think the street kit would be sufficient for the auto crossing that I do... I would love the ap racing calipers over the wilwoods though. Oh well! Thanks for the quick reply!

[Q8y_drifter]

If anyone is wondering

XXR 531 - 16x8 ET20 require a minimum 10mm spacer (12mm would be a safer option) using the Massive BBK 300x32mm Race Kit. No issues in the rear.

[Massive Lee]

If anyone is wondering

XXR 531 - 16x8 ET20 require a minimum 10mm spacer (12mm would be a safer option) using the Massive BBK 300x32mm Race Kit. No issues in the rear.

Good to know. Now we want to see pictures ;-)

[Massive Lee]

ahhh rats! I think the street kit would be sufficient for the auto crossing that I do... I would love the ap racing calipers over the wilwoods though. Oh well! Thanks for the quick reply!

For autocrossing, you don't need more than the Street kit. It will be a great improvement over stock. Less play in the caliper. Better modulation and cheap brake pads.

[Mfever]

Do they even make a AP racing caliper in the street kit size? or are they unobtainable?

[Massive Lee]

Do they even make a AP racing caliper in the street kit size? or are they unobtainable?

Only within the 300x32 Race configuration. At $600.00usd a pop, you want to put these clampers to a good use. ;-)
BTW $600.00usd is what the AP Racing importer Essex, in North Carolina, charges. You can probably get them for cheaper from a distributor. These calipers were much cheaper initially, then suddenly the price hit the roof...

If anyone was able to get them for cheaper, let us know. ;-)

[Mfever]

Copy that! thanks for the quick responses Lee as well as the awesome products!

[TheDirtyS54Thirty]

I did some skimming of the thread, but before I buy new slalom wheels, does the TRM C1 15x8 (or any of the kosei 15x8 et20 tirerack wheels) fit with the 300x32 + Superlites "Race" kit?

Also interested in this.

[bnmueller]

What about the Concave 17x8.5 ARC-8?