Does anyone know what's special about Ground Control Koni's?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chilezen
    I weld cats
    • Dec 2013
    • 1944

    #1

    Does anyone know what's special about Ground Control Koni's?

    I've had their coilover kit installed for about 10 years, and I'm happy with its performance. But given the time and miles these have endured as my daily driver, the struts are starting to leak, so it's time to replace.

    I know these are essentially re-valved Koni yellows, so I'm wondering if anyone knows, how different are they really? This is mostly a question for my wallet because standard shocks are about half the cost of the GC proprietary setup; they're asking $350 for each strut.
    I like the way their suspension rides, but like how important is their specific formula?

    I'll end up getting them, but I certainly need time to save up for that kind of purchase. So I thought I'd ask in the meantime.

    Currently building a badass coffee table
    Random stuff on insta @kevanromero
  • 2mAn
    SeƱior Mod
    • Aug 2010
    • 21080

    #2
    Id just get them rebuilt
    Simon
    Current Cars:
    -1966 Blue Boat
    -1969 Red VW
    -1986 White BMW
    -2006 Green Thing

    Make R3V Great Again -2020

    Comment

    • reelizmpro
      R3V OG
      • Dec 2003
      • 9559

      #3
      IIRC, the fronts are shorter revalved Corrado shocks and the rears are top adjustable revalved Camaro? shocks. The E30 Koni SA rear shocks were not top adjustable so you'd have to remove the bottom bolt, compress the shock and twist to adjust it which is a pain. So yes, they are different from the standard E30 Koni's.
      "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

      85 323i M TECH 1 S52 - ALPINEWEISS
      88 M3 - LACHSSILBER
      89 M3 - ALPINEWEISS II
      91 M TECH CABRIO 2.7L TURBO - MACAOBLAU

      Comment

      • mtech325
        E30 Addict
        • May 2008
        • 572

        #4
        I have the GC Koni's on my car. The main advantage in my experience is that they're valved to run higher spring rates (this was helpful when I had stiff autocross springs, but not anymore), and you get the top adjustable rear shocks (no need to remove rear shock to adjust). Since the front inserts are noticeably shorter than stock, you have to use a spacer in the strut housing to put it in the correct position, but they do let you chop the housings if you desire more travel to run at a lower ride height.

        If I were to do it again, I think I'd go with the normal off the shelf Koni Yellows like my friend has on his GC converted car as it still rides and handles quite well. Aside from getting the shocks adjusted initially, I haven't touched the adjustments since.

        Comment

        Working...