Does this look normal to you?
Collapse
X
-
Relax fellas we're just trying to help each other with ideas. The spring pads aren't going to keep the coils from binding but they will increase the ride height slightly and give the shocks more room to work with. Go to a junkyard or find someone parting a car and grab the pads from a donor car. Just get the rears (4), for a little more rake. The front looks perfect.Leave a comment:
-
oo i see. thanks man! i need to get 2 sets of pads asap
He was talking about those specific coils. Not the springs as a whole.
Spring pads are not going to change how many coils are binding or not binding. Spring pads are literally a pad that goes between the trailing arm and the spring and in effect raises the car slightly. think about it, essentially making the trailing arm thicker isn't going to cause the spring to decompress.
That said, I've never been in contact with the Race springs so i have no idea how much they should be compressed.Leave a comment:
-
He was talking about those specific coils. Not the springs as a whole.
Spring pads are not going to change how many coils are binding or not binding. Spring pads are literally a pad that goes between the trailing arm and the spring and in effect raises the car slightly. think about it, essentially making the trailing arm thicker isn't going to cause the spring to decompress.
That said, I've never been in contact with the Race springs so i have no idea how much they should be compressed.Leave a comment:
-
so basically what your saying is that the rear race springs has no effect on the ride ? just there to support?????? any comprehension of suspension at all? changing the settings of konis has absolutely nothing to do with ride height!
rear springs have dead coils. they don't do anything to support the car, so they touch. it's completely normal.
I feel sorry for the OP, asking a pretty simple tech question and getting completely wrong answers from all the noobs. If you don't have a clue don't open your mouth..Leave a comment:
-
also i called my shop that installed the springs and he said that my car did not have any spring pads. where is the best place bang for the buck, i can get them from?Leave a comment:
-
alright guys,
these were all good and helpful inputs by all you guys.
no need to argue and fight because everybody's input counts!
i'm just trying to cancel out all the problesm that it could be.
thanks for your inputs!Leave a comment:
-
giving an answer that is completely wrong doesn't help anyone. You'd be more helpful by simply not posting.
and I didn't mean to single you out, there were many other very useless posts in this thread.Leave a comment:
-
????? any comprehension of suspension at all? changing the settings of konis has absolutely nothing to do with ride height!
rear springs have dead coils. they don't do anything to support the car, so they touch. it's completely normal.
I feel sorry for the OP, asking a pretty simple tech question and getting completely wrong answers from all the noobs. If you don't have a clue don't open your mouth..
right. they do have dead coils. they are meant to sit on eachother but not 4 at a time. I have seen plenty of H&R race springs installed and they look nothing like that.
Quit being a dick and jump off your R3V high horse. All i was trying to do was give a possible cause to his situation.
I have seen a problem similar to this one with IE3 springs and it was because the guy installed his old beat shocks. So since i have seen it once, I recommended he check that. Is that a crime?
TaylorLeave a comment:
-
????? any comprehension of suspension at all? changing the settings of konis has absolutely nothing to do with ride height!
rear springs have dead coils. they don't do anything to support the car, so they touch. it's completely normal.
I feel sorry for the OP, asking a pretty simple tech question and getting completely wrong answers from all the noobs. If you don't have a clue don't open your mouth..
Hi nando,
So are you saying that the ride height is supposed to be that low? ThanksLeave a comment:
-
????? any comprehension of suspension at all? changing the settings of konis has absolutely nothing to do with ride height!
rear springs have dead coils. they don't do anything to support the car, so they touch. it's completely normal.
I feel sorry for the OP, asking a pretty simple tech question and getting completely wrong answers from all the noobs. If you don't have a clue don't open your mouth..Leave a comment:
-
yeah when I saw his car yesterday something didn't look right. I knew H&R race was pretty low compared to H&R Sport, but for the springs to be compressed that much I dunno. Hopefully he gets that fixed today. As far as the ride goes, it felt pretty good...stiff, but it didn't feel like it was bottoming out. Then again I only drove it around the neighborhood for a few minutes so I couldn't really test out the ride quality.Leave a comment:
-
I believe there is more clearnce then what that crappy pic shows.
Sure its normal for some coils to bind but leaving out the spring [ads will do nothing for the coil or its binding.
The spring pads will only help determine the ride height.
And most people know enough that on a late model you want to leave the rear pads in as to get a better stance and lose the dragging ass syndrome.Leave a comment:
-
doesn't look right, looks like you got the wrong spring rate or a junk spring. are both sides the same?Leave a comment:

Leave a comment: