ST Lowering Springs

[Bimmerguy91]

stock shocks (for now), cut bumpstops, e90 drophats:





I'm so excited :)

Which springs are these lol that's LOW

[mr ilia]

Are you stancing?

stock shocks (for now), cut bumpstops, e90 drophats:


I'm so excited :)

[Laura]

Which springs are these lol that's LOW

the ones for a 318i. yeah it's lower than I expected, but I'm not complaining :)

Are you stancing?

that's the plan. I need wider wheels. and right now my camber is all funky from the drop.

[HerbReal]

Laura,

That's crazy low! I should've bought the 318i springs than the 318is! I'm straight jelly Clarkson.

Herb

[Bimmerguy91]

Sweet that's the ones I bought of course a vert will get lowered more than a coupe or sedan unless they are vert specific springs

[ButtJuice]

3 left

http://www.ebay.com/itm/271074376592?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

[einstein57]

I would not be surprised if they were all the same springs. If a M3 is a half inch lower then the 318is from the factory then the net drop would be different even though the final result is they both sit at the same final height.

[ButtJuice]

I just ordered the 318is springs for my 91' 325i. All I hope is that there isn't any rake or oil-pan-cracking lowness. I'll post some nice pictures and specs after I install them and drive around a bit.

[Chriskbmx]

I just ordered the 318is springs for my 91' 325i. All I hope is that there isn't any rake or oil-pan-cracking lowness. I'll post some nice pictures and specs after I install them and drive around a bit.

as long as you drive catious you shouldn't have an issue. my last e30 was slammed and i was just carful. never hit anything but speed bumps lol

[Andrepuffin]

e30

I found a set, it says for 318i.
would it fit on an 325e????

about to order a set....

[ButtJuice]

as long as you drive catious you shouldn't have an issue. my last e30 was slammed and i was just carful. never hit anything but speed bumps lol

Well, I'm getting EuroWeaves, so hopefully the extra inch will allow the 'cautiousness' to let up. If not, I'll sell 'em to someone for $60 ;)

[reelizmpro]

Nigel, they all have different part numbers though. I would probably run the M3 springs on a 325. The M3 is heavier than the 318. Besides, the H&R race/IE3 springs are E30 M3 spec springs and many people like them on the 325.

[Andrepuffin]

would you say

these :http://www.ebay.com/itm/ST-Suspensio...item3f1d42fced

better than these: http://www.ebay.com/itm/ST-Suspensio...item3f1d4abb90

for 1985 bmw 325e??

[5Toes]

Hahaha mine came with an oldschool decal. WOOT

[ButtJuice]

Wow, I got my springs in ONE day. They must be really close by to where I live.

Anyway, they are so PUNY!



I'll post pictures of these installed, if they're too low I'll sell 'em to someone local for cheaper than $70.