4in springs and raceland vs jom?

[acolella76]

See if einstein57 can order you some 60mm Hypercoils, or go here

[Mr. Tasty]

Know anywhere that sells 4inch 60mm springs?

sounds like cut springs are in your future.

[acolella76]

^ wtf no!

[Mr. Tasty]

i am guessing for the fronts? and running 2.25 inch springs in the rear? There are no option for 4 inch 60mm springs

[acolella76]

Click the link in post #16, search for 60mm x 100mm springs (4in = 101.6mm)

[Edirtyy808]

okay so whats the true size that joms can run? 2.25? if adjuster flipped?

[acolella76]

Seriously am I speaking in tongues or something? Lol the diameter of the JOM/raceland adjuster is 60mm... that is not 'flipped' or any other weird voodoo magic. Just the OD of where the spring sits...

[Chriskbmx]

what spring rate would you guys use with 375 front springs?

[ak-]

Oh my god.

[AbsorbantNut]

I have 400lb front and 650lb rear

[e^2]

At four inch your springs will fall out if you lift your wheels, right? I was going to order0600.225.0550 on monday for my rear.

[Chriskbmx]

i was going to do a suspension limiting strap for that.

[Chriskbmx]

does anyone think 4inch is 2 short?

[florida_dirt]

does anyone think 4inch is 2 short?

:giggle:

[e^2]

I'm going to order 4" springs. It should give me 2" of upward travel before the lower sleeve hits the upper mount.

As it sits right now, my 6" rear spring with the sleeve adjusted all the way down sits right about stock height. So a 5" spring will lower it 1" with no further adjustment. I'll go 4" and adjust the sleeves up to get me 1" lower. Plus the higher spring rate springs won't compress as much. I'll get one of those tender/helper springs to keep everything in the perches.