swaybar bushings, links, etc

[wastedincome]

While my cabbie is hibernating this winter I'll be replacing much of the suspension, mounts, bushings, etc with mainly all upgraded parts.
I'm not sure what to do when it comes to my sway bar mounts and end-links. For now I will be keeping the stock sways but want to upgrade the hardware if I can. IE's rear mounts seem great cause they will give what ever size bushing you need. What about the front and endlink??

[wastedincome]

bump for the morning crowd ;)

[Digitalwave]

If you are using OEM sways I'd think the stock links are just fine.

[wastedincome]

If you are using OEM sways I'd think the stock links are just fine.

Thanks, I have considered swapping out my rear for a M3 one though. Since its a cabby I allready have the biggest stock front bar made

[Digitalwave]

I'd say you are fine with an M3 bar and stock links (M3 links with a larger bushing) as well.

[nando]

M3 rear links are the same as any other E30 anyway...

[Digitalwave]

I was unsure, didn't think an thicker M3 bar would fit in the smaller bushing for a 325i link. Must taper the bar down at the ends.