Comprehensive guide to extreme lowering?

[Liquidity]

Just stop. If you can't even make one on topic post, please don't bother me.

[Mr. Tasty]

The only time I mentioned springs was when I specifically said I wasn't talking about them in this list. But thanks for sidetracking my thread with the very first reply. I appreciate it.

you said e90 top hats, that is for stock diameter springs.

[Liquidity]

So besides the springs, I haven't missed anything? This should allow the mechanical side of the suspension down a good 3-4" without binding anything up?

[LJ851]

ovaled out trailing arm mounting points

Best mod

[aPapester]

get coil adjusters with your choice of springs and cut the spring perch down. that helps a bit

[Liquidity]

The only time I mentioned springs was when I specifically said I wasn't talking about them in this list. But thanks for sidetracking my thread with the very first reply. I appreciate it.

[Mr. Tasty]

you are going to run stock springs on sectioned tubes? What's the point, just go coil over.

[Liquidity]

So far after a couple weeks of looking through this forum I've gathered you want for the front:
e90 top hats
ix front shocks
strut tubes shortened 85mm
short stabilizer links

And for the rear:
3rd gen camaro rear shocks
offset subframe bushings
ovaled out trailing arm mounting points

Apart from my choice brand of springs and dampers, is there anything I'm missing?