im doing offset strut bearings and camber plates tonight, and i forget... do you have to use a new nut for when i remove and reinstall the strut bearing? thank you!
Announcement
Collapse
No announcement yet.
do i have to use a new nut when doing strut bearing?
Collapse
X
-
Originally posted by DigitalwaveThe nut is 19mm, but I don't know the pitch. I have reused mine like 20 times now, unless the nylon on yours looks bad just reuse it.
Dan,
If you can find the correct size for the nut, I'd go ahead and get some if you can find them.Originally posted by Grueliusand i do not know what bugg brakes are.
Comment
-
by the time i got to replacing the nut, every store was close, so i re-used it, it will be fine. im 3/4 through everything now, and i only started 2 hours ago :) I dissasembled each front side in about 20 minutes, assebly took another 45 minutes (I had to wait for a buddy to bring over a socket i lost out of my set) now re-assebly of the passenger side took about 45 minutes, im gonna do the drivers side after i eat real quick, its already dark, so whatever. camber plates and offset strut bearings are sweet, i think they'll be good. This is the first time i've done the suspension myself, i have to say im proud that I havent run into any problems or got lost at all. feels good to be able to do things like this on my own...Dan
Comment
Comment