When my wheels are on lock, the inner sidewall is making contact with the swaybar, where it bends from going under the car, to the mount.
I have 205/50/15 on Kosei-K1 ET25 wheels.
H&R Sway bars, with IE sway bar reinforcements.
Z3 2.7 Steering rack.
Offset M3 control arm bushings
I tried a 10.5mm spacer, and it makes the wheels stick out about 1/2" past the fender, I have a 3mm on there right now, and it's not enough. I doubt a 5mm spacer would do much.
Anyone else had this issue?
I have 205/50/15 on Kosei-K1 ET25 wheels.
H&R Sway bars, with IE sway bar reinforcements.
Z3 2.7 Steering rack.
Offset M3 control arm bushings
I tried a 10.5mm spacer, and it makes the wheels stick out about 1/2" past the fender, I have a 3mm on there right now, and it's not enough. I doubt a 5mm spacer would do much.
Anyone else had this issue?
Comment