ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[crazy seaman]

im looking to get a set of these for my car. I currently have the tokico kit on my car which lowered it id say about 2 inches. Can anyone post a pic of these if they have them on there car- or give any input on the quality of these wheels.
Im also up for suggestions if i should get the black ones with chrome lip (similar to my current wheels) or the all silver ones.
thanks guys.
this is a link to the wheels.

https://wagen-wheels.com/products/Kyowa_Evolve_17-96-4.html

[Mr Two]

I want to run 17's, with ideally 245's non staggered. Right now I'm on 15x8 et 20 Slips, running a 225/50. ~3 degrees of negative camber in the rear, ~4 in the front, each side. Fender lips are rolled flat. It looks like I'd have enough space if I went with a lower offset - et5 or so?

[Mystikal]

17x7 et27 lowered on Ie3.

Looking for the ideal tire size so no rolling will be needed. Thanks.

Nice offset. 215/40/17, nothing needed.

[Mystikal]

im looking to get a set of these for my car. I currently have the tokico kit on my car which lowered it id say about 2 inches. Can anyone post a pic of these if they have them on there car- or give any input on the quality of these wheels.
Im also up for suggestions if i should get the black ones with chrome lip (similar to my current wheels) or the all silver ones.
thanks guys.
this is a link to the wheels.
https://wagen-wheels.com/products/Ky...e_17-96-4.html

They aren't bad looking at all, but you'd need at least 20mm spacers to pull them off.

[Mystikal]

I want to run 17's, with ideally 245's non staggered. Right now I'm on 15x8 et 20 Slips, running a 225/50. ~3 degrees of negative camber in the rear, ~4 in the front, each side. Fender lips are rolled flat. It looks like I'd have enough space if I went with a lower offset - et5 or so?

Everything you said made sense until the last sentence.

245/35/17 all around is easy with your setup, but you'd want the offset around 15-20 (for a 17x8.5).

[Mr Two]

A lower offset would move the wheel outwards, correct?

Right now I've got strut clearance issues in the front, so wouldn't I want a lower offset?

[Mystikal]

A lower offset would move the wheel outwards, correct?

Right now I've got strut clearance issues in the front, so wouldn't I want a lower offset?

Strut clearance increases with wheel diameter (the strut is tilted slightly). 17x8.5 +18 would easily clear with a 245.

[Mr Two]

Aha. So, assuming 20mm for the adapters, I'd be looking for a wheel with an offset around 30-40mm, correct?

[Omaliyo]

So im thinking of these, i have a early model e30 so = huge arches..... what would take to make these hella flush approved (im on gc's and bilie sport so hight can vary)... specs

16x8
et 34
front et = 5mm
rear et = 0mm

any help would be sweet!

[that1kidtony]

any suggestions for wheel size with negative offset for e30 m50 im thinkin like 16x8.5 front 16x9 rear. but idk offsets well i want like 3 to 4 in of dish almost vip

[daniel]

any suggestions for wheel size with negative offset for e30 m50 im thinkin like 16x8.5 front 16x9 rear. but idk offsets well i want like 3 to 4 in of dish almost vip

negative offset? have fun with that

[z31maniac]

This is fitment #37 I've spec'd for you. lol.

Time for number #38.

16x9 215/40
16x9.5 225/40

Again, late model car with coilovers. What offsets for a flush fit, fenders will be heavily rolled.

[baaaaaaa]

How would I fit a set of BBS RX 16X7's and where is the best place to buy the lugs and spacers.

[JGood]

15x7 et27 Kosei K1's

Can I fit 225/50 Hoosiers? What about 225/50 street tires? I don't mind rolling the fenders, just trying to avoid spacers. I need to figure out if I am using these wheels for street or track tires. If I can fit 225's, they will be my track wheels. If I can only do a 205, they will be my street/wet track wheels.


EDIT: While I'm at it, 16x8 et20 Rota Slipstream

Currently running 205/50/16 Hankook z214 R-comps. Can I run a 225/45 r-comp? Street tire?

[NickL]

Nice offset. 215/40/17, nothing needed.

Thanks a lot man.