Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
So as long as the surface that meets with the Hub is hub-centric then the wheels that attach to the spacers don't matter?
-
Originally posted by E36kid View PostWheel noob here. I've always used factory wheels on my Bmws. But I now find the need to Branch out. I'm looking at a set of 15x7 4x100 +30 wheels with a 73.1 center bore. These should be pretty similar to us stock wheel set up, shouldn't it? I realize I will have to use some hub-centric rings to make them balance correctly. My question being if I end up needing spacers how do I go about doing that? Seeing as I can't find any 57.1 to 73.1 spacers without having them custom built and spending a lot of money (I'm not looking to spend a ton on this car and will probably sell to acquire a late model at some point). Also I will be on Raceland coilovers and I was curious how wide of tires I can run without any rubbing. Thanks
All you need to do is get rings that bring the bore of the wheels from 73.1 to 57.1
Leave a comment:
-
Does anybody still help in this thread?
Wheel noob here. I've always used factory wheels on my Bmws. But I now find the need to Branch out. I'm looking at a set of 15x7 4x100 +30 wheels with a 73.1 center bore. These should be pretty similar to us stock wheel set up, shouldn't it? I realize I will have to use some hub-centric rings to make them balance correctly. My question being if I end up needing spacers how do I go about doing that? Seeing as I can't find any 57.1 to 73.1 spacers without having them custom built and spending a lot of money (I'm not looking to spend a ton on this car and will probably sell to acquire a late model at some point). Also I will be on Raceland coilovers and I was curious how wide of tires I can run without any rubbing. Thanks
Leave a comment:
-
Style 9's
Found these Style 9's locally for $100 and think they'd look amazing on the e30. I believe they're 16x7.5 et 15. Planning on buying 42 Draft Design adapters. Wondering what thickness adapters to buy and what tire size I should run.
Car specs:
1987 325e lowered on H&R Sports
Also, does anyone know the hub size for the Style 9's? I believe 72.5 mm.. Correct me if I'm wrong.
Thanks in advance for the help.Last edited by RichiesE30; 09-24-2017, 03:27 PM.
Leave a comment:
-
CCW Classics
Heavily considering a set of CCW Classics
Wondering if I will be able to run 16x10 square on BC Coils and how much tire I will be able to clear and what offset is ideal.
Thank you for your help!
Leave a comment:
-
1989 BMW 325i Wheel Fitment
I have a 1989 BMW 325i with CATuned coil overs. The rims I have are 16x8 with +25 offset. I know I have to at least run a 3mm spacer or they just skim the brake caliper. I have 3, 5, and 10mm spacers to use. My question is what size of tire would work with this setup? I have all new plastic in the front of the wheel well for the brake ducting to make it all nice and clean in the front so I would not prefer to trim it. I have test fitted the rims with all the different spacers and I am quite concerned that I have made a bad rim choice but yet I see lots of others out there who have made this work. I have also heard opinions that the 16x8 with a +15 offset is the perfect rim size for the E30, hence the reason I have 10mm spacers as well. I am not going for stretched tires on this build, I want to have a more performance tire on there with a tread wear of about 200, 100 would be too soft for daily driving but also don't want rubber bands. I don't mind rolling the fenders so long as it is just the inside lip as I want to keep the body lines stock, but finding someone in Edmonton to roll them with a fender roller might be tough. Any thoughts on this would be helpful.
Thank you.
Leave a comment:
-
This weekend I have fitted 215/45/17 tires on 17x8.5 et25 with a 5mm spacer on the front with
H&R sport springs.
The rear is 215/45/17 tires on 17x8.5 et25 with a 3mm spacer and H&R sport springs.
Not rolled fender.
Hope this info help some of you.
Sent from my Pixel XL using Tapatalk
Leave a comment:
-
His last reply was July 27th. He gets to it every now and then, I say be patient.
Sent from my iPhone using Tapatalk
Leave a comment:
-
I'm close to pulling the trigger on some Gotti 1001's but they're overseas and overpriced. I'd like to be reassured these will fit before I pull the trigger.
Specs:
Gotti 1001
16x8.5
5x120
et 21
Thoughts:
4x100->5x120 adapters 18f, 20r
Car:
88 e30
Rolled, not pulled
Rx7 calipers in the front
Thank you!
Leave a comment:
-
Looking at getting TRM C1s in 15x8 with 20mm offset
Trying to fit 245/40/15s all the way around, is this possible?
I have a 1988 325i with a Ford 347 stroker that I'm trying to keep from spinning everywhere.
Leave a comment:
-
Two questions. Both dealing with a '91 vert with bav auto springs and bilsteins.
Will RWD 14inch weaves with 20mm spacers all around be overkill?
Also what would be an appropriate tire for 16x8.5 with +15 without rolling fenders?
Leave a comment:
Leave a comment: