ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[bmk]

I have some Schmidt modern lines. 16x9 et 25 I think. I'm looking to run a meaty tire. I am on coils with rolled fenders.

Similar to me except I got 17X9 +25 I am hoping I can fit 235/40's

[ST1G]

Similar to me except I got 17X9 +25 I am hoping I can fit 235/40's

I'm hoping to go 225/45

[KnockOffBrand]

I've got 16x8 +20 offset wheels and I'm thinking of running a 205/50. I've got a sedan lowered on h&r race/billy sports and my fenders are rolled already. Would 205/50s run without rubbing? Also would I need to use spacers?

[Rev Run D]

I've got 14x6 +13 and +8 wheels. Thing is that they're 4x114, so I'll need adapter spacers, thinnest being 15mm, which would make effective offset 14x6 -2 and 14x6 -7. Would these fit an e30 running H&R OE Sport and stock 195 60R14 tires?

[Tree25]

205/45 front, 215/45 rear, rear roll. Hubcentric rings.

Any requests on where i can get a matching set or what to go with?

Sent from my SM-G928V using Tapatalk

[Mystikal]

I have an 89 vert on eibach Springs, I have 15x8.5 wheels et 25 that I want to put on , any tire size and recommendations?

Sent from my SM-G930V using Tapatalk

10mm hubcentric (with lip) spacers all around and 205/50 tires. You need the spacers for the front strut clearance.

[Mystikal]

89 e30 vert with e30 m3 body panels.
e36 m3 front suspension.
Z3M rear.

Looking to run a 17" wheel. 8/9 inch width and a tire with little to no stretch.

Just too many variables there for me to make any sort of suggestion. You'll need to test and try stuff out.

[Mystikal]

running a 17x9 +25 in the rear, will 235/40/17 595RS or Nankang NS-2R fit? late model cab on H&R race

Nope.

[Nick_e30]

10mm hubcentric (with lip) spacers all around and 205/50 tires. You need the spacers for the front strut clearance.

So 225's would be a bad idea?

[Mystikal]

hey, shout out from Australia!

i have a 1990 318is, just picked up some 16x7 ET33 BBS RS with 4x114.3PCD which are going in for a full refurb.

i could fill and drill but i'd rather run 20mm adapters as i'd like a nice wide track and would therefore run beefy spacers anyway.

i know ET25 is the ideal, and these would end up being 12mm further out, but any possibility this would fit? and what tyres should i run? and would i then need to roll the fenders?

Sure, with 205/45 tires. Shouldn't need a roll.

[Mystikal]

I have a set of style 32 17x8 et20 for the front and 17x9 et26 for the rear. Doing a 5lug swap with GC coils. Would you be able to tell me what size spacers/tires i would need to run?

Which 5-lug?

[Mystikal]

I have some Schmidt modern lines. 16x9 et 25 I think. I'm looking to run a meaty tire. I am on coils with rolled fenders.

Front: Can't work
Rear: 225/45s and a good fender roll.

[Mystikal]

I've got 16x8 +20 offset wheels and I'm thinking of running a 205/50. I've got a sedan lowered on h&r race/billy sports and my fenders are rolled already. Would 205/50s run without rubbing? Also would I need to use spacers?

Yep. No spacers.

[Mystikal]

I've got 14x6 +13 and +8 wheels. Thing is that they're 4x114, so I'll need adapter spacers, thinnest being 15mm, which would make effective offset 14x6 -2 and 14x6 -7. Would these fit an e30 running H&R OE Sport and stock 195 60R14 tires?

Unfortunately not. From my calculations if you run something silly like a 175/65 they can fit. Otherwise it's too far outside.

[Mystikal]

Any requests on where i can get a matching set or what to go with?

Sent from my SM-G928V using Tapatalk

https://www.discounttiredirect.com

www.onlinetires.com

https://www.vulcantire.com

https://www.ebay.com

No idea if there's anything matching available. Staggered 16" for E30s pretty much requires mismatched tires now.