If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Ive got a Vert on bavauto springs and billie sports
either set?
I'm still fighting myself to not get them. Wish they had the flat caps.
Just buy that staggered setup. Or, you can do the 16x9 all around with 10mm spacers at all 4 corners. But with the amount of lip on that 16x7.5, I wouldn't bother with the hassle.
As for tires, I'd just run 205/45/16 all around for simplicity's sake.
I'm wanting to put 16x9 +8 up front and 16x10 +8 on my 325i...i'm going to use 195/45/16 up front but not sure what i'm going to need to use on the back. I am on GC coilovers with shortened housings..and yes i will be rolling and slightly pulling the fender lip as well...any recommendation for the rear tire?
I'm still fighting myself to not get them. Wish they had the flat caps.
Just buy that staggered setup. Or, you can do the 16x9 all around with 10mm spacers at all 4 corners. But with the amount of lip on that 16x7.5, I wouldn't bother with the hassle.
As for tires, I'd just run 205/45/16 all around for simplicity's sake.
awesome sopunds good,
I think ill get a staggered setup and the 10mm spacers at 4 corners. I'm not into rolling fenders so ill go with the lower profile tire that you suggested too.
Ill be powercoating them white.
should i go all white or white and keep the machined lip?
I'm wanting to put 16x9 +8 up front and 16x10 +8 on my 325i...i'm going to use 195/45/16 up front but not sure what i'm going to need to use on the back. I am on GC coilovers with shortened housings..and yes i will be rolling and slightly pulling the fender lip as well...any recommendation for the rear tire?
I'm wanting to put 16x9 +8 up front and 16x10 +8 on my 325i...i'm going to use 195/45/16 up front but not sure what i'm going to need to use on the back. I am on GC coilovers with shortened housings..and yes i will be rolling and slightly pulling the fender lip as well...any recommendation for the rear tire?
215/40/16 is possible to mount, but it'd be an extreme stretch. I'd probably go with 225/40/16 for safety's sake, which is still an insane look.
I think ill get a staggered setup and the 10mm spacers at 4 corners. I'm not into rolling fenders so ill go with the lower profile tire that you suggested too.
Ill be powercoating them white.
should i go all white or white and keep the machined lip?
I like machined/polished lips, personally. They really make the wheel pop, especially with stretched tires. You can see the rear lips while driving directly behind my M3. :D
Comment