ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[Mystikal]

Durr I didn't realize there was a tire thread, my bad.



EDIT: Here's a real question, though.

The ESM/pro-jecc Type A reps:

http://www.r3vlimited.com/board/showthread.php?t=146378

With a 5mm spacer, I'm assuming these would fit fine. Or no spacer?

What size tires, though? The staggered set up.

No prob.

The A reps need nothing, those guys have been heeding my advice for years. :p

205/45 front and 225/40 rear works. Roll the fenders in the rear. If you go 205/45 all around (I'd do this, cause I'm strange like that) you won't need to roll.

[Atreus]

okay, i tried searching, to no avail. can i run stock 325iX wheels on my e30? they are the 15" et41's i think. i understand that the normal offset is around 30?

plz halp. lol.

[chadthestampede]

^ not to thread jack, but it was answered a few posts up:

This probably has been covered many times over, but I couldn't look through 189 pages. I have a set of 15in basketweaves from a 325ix. I wanna put them on my 91 318is and I was wondering what the best size wheel spacer would be? Again sorry if this has been covered.

15mm front 20mm rear would be nice.

[Atreus]

now i need spacers. great. i miss my 15" iS weaves from my vert.... :(

[M Kube]

i'm throwing 16x9 DZ1s +15 on my car with 215/40/16..i was wondering what would mm spacer i would need to clear the struts? i've been hearing 5&10 lately. input please..:D

[Mystikal]

i'm throwing 16x9 DZ1s +15 on my car with 215/40/16..i was wondering what would mm spacer i would need to clear the struts? i've been hearing 5&10 lately. input please..:D

3mm is actually enough.

[dsm2002]

225/55HR15: notional OD is 628.5mm. Too great on 15x7" et20?

[daniel]

225/55HR15: notional OD is 628.5mm. Too great on 15x7" et20?

too large, yes.

[Omaliyo]

Wheel size? No. I was going by the final offsets you posted (5 and 0).

Crap i meant tire size..

[gk1]

4x100 to 4x114.3

I got a set of 18" with +43 offset from Honda Accord with 4x114.3 bolt pattern, just wondering if these wheel adapters will be able to make the wheels fit on to a 91 318is

http://cgi.ebay.com/ebaymotors/25mm-4x100-to-4x114-3-Wheel-Adapter-Honda-Acura-Toyota_W0QQcmdZViewItemQQhashZitem518f097f33QQitemZ350292115251QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[bimmer_E30]

i am running 16X9's wheels all around, ofcourse rolled rear fenders. i was wondering how to make my rears poke as much as the front ones. i am running 215-40-R16s all around.

thank you.

[theox69]

i am running 16X9's wheels all around, ofcourse rolled rear fenders. i was wondering how to make my rears poke as much as the front ones. i am running 215-40-R16s all around.

thank you.

offset?

[bimmer_E30]

;)

offset?

Et15?

dunno there azev type A

[Stephen]

17x9 and 17x10. What final offsets will i need, i know this is pretty evil fitment. Also, tires? Not only am i ok with stretch, i know its a necessity

[z31maniac]

17x9 and 17x10. What final offsets will i need, i know this is pretty evil fitment. Also, tires? Not only am i ok with stretch, i know its a necessity

ET 10 and 20ish?

205/40 up front and 225/35 out back, and you're going to need some stiff springs out back to keep from destroying your fenders.