ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[Mystikal]

I have a set of Style 5's 17x8 et20 with adaptec 4x100 to 5x120 adapters that I want to run on my e30. What do I need to do to make this work and what tire size can I run?

205/40 is the common choice. You'll need to roll and maybe pull your rear fenders for clearance. Same with the fronts if you're VERY low and don't have camber plates.

[Mystikal]

Jay, need your advice....

Will 18x8.5/9.5 et 25 wheels fit E36 sedan? Recommended tyre sizes?

Thanks a million :)

Yup. 215/35 front 225/35 rear is ideal. You'll need a rear fender roll.

[mashpro]

205/40 is the common choice. You'll need to roll and maybe pull your rear fenders for clearance. Same with the fronts if you're VERY low and don't have camber plates.

Thanks for the info!

[kreasims]

Yup. 215/35 front 225/35 rear is ideal. You'll need a rear fender roll.

Thanks Jay :D

[KVF]

205/60/14 on the stock weaves (14x6.5 ET30 bavauto springs with billies)... What spacer size would you recommend to get as far out as possible without having to roll fenders? Would an 10mm be possible?

Thanks!!

[Mystikal]

205/60/14 on the stock weaves (14x6.5 ET30 bavauto springs with billies)... What spacer size would you recommend to get as far out as possible without having to roll fenders? Would an 10mm be possible?

Thanks!!

15mm all around.

[KVF]

Thanks!!

[madsedan]

17x7.5 with offset of 35 work on my 91 coupe or is the offset no good?

Got a deal on some wheels from a Honda club guy but the offset is my concern.

Thanks!

[Mystikal]

17x7.5 with offset of 35 work on my 91 coupe or is the offset no good?

Got a deal on some wheels from a Honda club guy but the offset is my concern.

Thanks!

They'll likely just clear the struts without spacers, but look very poor. 15mm spacers all around (or 20mm rear for even fitment).

[lambo]

Quick question. I should be fine with 205/60 512's on my bcaps with gc coils, correct?

[frolf]

Confirming question from a thread I just posted:

Will I be ok with 225/45-16 Falken 512s (tread width 7.7in) on my et23 Style 5 wheels seen in the '87 325i seen below?

[madsedan]

Thanks Mystikal, awesome intel!

[Mystikal]

Quick question. I should be fine with 205/60 512's on my bcaps with gc coils, correct?

Yup.

[Mystikal]

Confirming question from a thread I just posted:

Will I be ok with 225/45-16 Falken 512s (tread width 7.7in) on my et23 Style 5 wheels seen in the '87 325i seen below?

Yes, if they're redrilled. If your car is 5-lug it will be very close to rubbing in the rear.

[frolf]

Yes, if they're redrilled. If your car is 5-lug it will be very close to rubbing in the rear.

Thanks! They are filled and drilled.