ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[Jozi]

Email me for pics. ruffin.gary@yahoo.com.

Cheers.

Do you mind sending me pics also? I'll drop you an email if not.

[g.ruff561]

It's best to reach me by email or text. Text number is 561-758-7218. BadfishTx, I only have pics of 16x9, 20mm offset, 4x100. My car is an MT2 vert app pack. White/black auto with power top. If you want to see the set up, hit me back by direct email.

Jozi, email me directly and I will send pics.

Cheers.

[Sputnik]

I have euroweaves on 205/50/15 rubbers on a bilstein and hr sport suspension.
How large of spacers can I go without rolling/rubbing on the fenders?

lmk

[Mr. Tasty]

It's best to reach me by email or text. Text number is 561-758-7218. BadfishTx, I only have pics of 16x9, 20mm offset, 4x100. My car is an MT2 vert app pack. White/black auto with power top. If you want to see the set up, hit me back by direct email.

Jozi, email me directly and I will send pics.

Cheers.

if anyone interested in his fitment, he sent these pics to me.

[CHIF8008]

sorry i dont really have the time to find out the perfect e30 offset, but i wanna run a set of wheels that have a ET of 34 up front and 37 out back. 18's btw. 8 wide up front and 8.5 in back. kinda want a flush look. car is slammed btw maybe need it so i can tuck the 18's. for a better look.

id be running 5-lug adapters if its possible and would have the adapters be the spacer if needed(i dont really know what i need)

any insight? rolling and pulling is fine, also would need the ideal tire size
thanks

[Mr. Tasty]

cant tell if serious or joking. Im leaning on joking

[Mr. Tasty]

Anybody running a 16x8 et0? I think I've seen it done, but I want to run a similar set up

my buddy is. His rubs pretty bad on turns. I think he is running 215x50

[CHIF8008]

who me? id rather them be 16's, but i guess the wheel only comes in 18 from factory.

what a 4mm spacer up front and 5 out back? (still confused on the whole add spacer and ET gets smaller?) or is it the other way around?

[Mr. Tasty]

add spacer, et gets lower. Et is in mm from the center of the wheel, so for a 8 inch wide wheel, 4inches is the center. +20 et is 20mm in the direction of the outside of the wheel. If that makes sense. I know I didn't word that well

[Mr. Tasty]

and I am going to be running 16x9 +30mm with a +18mm adapters.

Final fitment will be 16x9 +12mm.

[darvo]

I'm running 16x8 et20 with 215/45's, On front the car is flush but in the rear it needs a spacer, what spacer should I run 13mm,15mm,18mm?

Late model 325is(small archs)

[Mr. Tasty]

^just measure?

[StealthiE30]

So whats the biggest spacer you can run with stock lugbolts on a 16x7 konig remember? Not sure of current offset, but i would like the rears to not be so sunk in.

[DetailAddict]

looking at ESM-002R with the following setup...

Option 1:
16x9e15 w/ 215/40/16 box

Option 2:
16x8e20 w/205/45/16 and
16x9e15 w/215/40/16 stagger

anything i should avoid/watch out for? Will be going BC coilovers pretty much at the same time.

[PDX318is]

Need closest match available to 205/60/14.

I have a lightly used e30 318is that I last bought tires for in 2005. It's time now and now I realize that the 205/60/14 size that are on the car now are no longer available (stock bbs basketweave wheels--stock size was 195/65/14 which I don't want).

What's the closest that I can get-what are you running? Any opinions greatly appreciated-I searched the thread and couldn't find anything current. Thanks!