Car wouldn’t pass BAR, it’s a completely stock S50 in a 318is When the ref plugged in a scanner to see live data, it showed the car was traveling 18mph while at idle, the speedo reads right, what would be causing this issue?
-
-
I had this same issue your dme is probably from an automatic . Same thing happened to me so I had to buy a manual dme and then he passed it . He also made me have the glovebox taken apart so he could see the dme part number and vin -
I searched up the vin and the car it came from was a manual, i’ll call bmw in the morning just to confirm. In the case that it is a manual ecu, is there anything else that would effect speed that the ecu is seeing?Comment
-
so I called bmw to decide the vin and turns out the ecu is in fact from a manual car.
as for the sniffer test, I did change the oil (5w-40 castrol euro) a week prior and the car burns SUPERR clean, so there was no issues smog/emissions wise. although the car could benefit from a new 02 as the scanner also read that the 02 was staying at .4v and not fluctuating.Comment
-
Hmmm I’m not sure then . I failed because of the dme the first time . Then changed the dme and passed the second time . Luckily that was my only correction . The tech told me don’t worry no one passes the first try although I was very close . Good luck!! When they pass you and you pay the sticker fee is a great feelingComment
-
I can’t wait for that feeling, just have to figure this little hiccup first, it’s completely throwing me for a loop.Comment
Comment