Tool Thread - Post up your new tools!

[$hane]

Nice. Does it have any live tooling?

Yes. We got 2 bar heads and 2 face heads. Heres a piece done in one op. Its for a Phoebus HID flashlight.

[MrSlacker]

OTC Compression and Leak Down testers

[camip]

I want that compression tester.
Got this sand blasting unit for free!

[george graves]

Thickness gauge. I'm not a machinist - so this will be fine for my needs of measuring thickness of plastics and what not. (already have digital calipers, but these can measure things that calipers can't)

[Farbin Kaiber]

Harbor Freight?

[$hane]

After breaking 2 craftsman ratchets and 1 metacarpal last week i felt this was a justified expenditure. It has such a short stroke. giggity

[tinkwithanr]

Aside from all the basic hand/power tools, these are my pride and joy:

Hobart MIG Welder - 200 Amp


Lincoln SquareWave TIG Welder - 180 Amp


Old Radial Drill Press, Dirty but works great


1941 South Bend Heavy 10 Lathe, holding me over til I finish rebuilding my other Heavy 10


Seiki Vertical Mill, still need to get some tooling for it

[$hane]

nice setup man! not much you cant do with what you got there. do you have a tubing bender? i made one from drawings i found online and it uses jd2 dies. it was pretty straight forward and you shouldnt have a problem making it with what you got there.

[devon.818]

After breaking 2 craftsman ratchets and 1 metacarpal last week i felt this was a justified expenditure. It has such a short stroke. giggity

i have the same one!
1/2 drive, 3/8 drive, and the 1/4 drive.
even have the 3 foot breaker bar :)

[george graves]

Harbor Freight?

China/hong Kong.

[TwoJ's]

+/- .005"?? Not that you need to, but you can do much better than that with just a caliper. Do you not have one?

[Farbin Kaiber]

China/hong Kong.

Magic, Don Juan.

[george graves]

First off.... It's Mr. Juan.

Sorry - I don't have the link. :| I know it took 2 months to get here. It might have been dealextreme.. Harbor Freight most likely sells the same unit - I don't know.

[Farbin Kaiber]

I just was going by the indicator looking just like a Pittsburgh unit I got from a local bearing place, that they buy from HF.

http://www.harborfreight.com/hand-to...per-47260.html

[george graves]

Here ya go Farbs: http://www.dealextreme.com/p/1-2-dis...-x-ag13-117846