how do i bend it back....i tried to hammer it in, but it won't budge. just leaves dents in the door frame. i need it drivable at the least :( i fuckin miss it
21+ year old body parts, where are they?
Collapse
X
-
I bought a door off a member hear for $30 in Great condition. The only thing that sucked was he cut the harness going into the door. So I had to Re-use my old harness and re-route it into the new door.
Tip: Take the door off by the THE HINGE PINS Or you will have a helluva time re-alinging the door. Do Not Unbolt it!!!!
I also had the problem where the rest of my zinnoberrot paint was faded and the door wasnt. >_<1985 325e M50TU(Sold)
1991 318is Slicktop (Sold)
1990 325is Brilliantrot S50/5 Lug Swapped.
1992 525i Manual shitbox Winter BeaterComment
-
-
Need a part? PM me.
Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123Comment
-
i found a lady in new jersy that has oem panels , she used to run a body shop in the 80s and specialized in bmw i will give you here info i got a drivers side rear quarter panel .you know you drive an e30 when you spend more time and money on it than your girlfriend.
Comment
-
Comment
-
I'm in Bellevue and may have a driver door, I need to check and see if it is for a 2-door or 4-door. But it won't be red.Lance Richert '88 M3, #35 PRO3, i3 etc.
www.LanceRichertArchitect.com
2019 E30 Picnic Weekend: June 22-23 2019

Comment
-
Im fairly sure the wiring in late model doors is different then early doors. Of course 2 door and 4 doors are different.1986 Plymouth Horizon. Base.Comment
-
theres a bmw specialty wrecker about an hour drive from my house....
hes got dozens of e30's in the yard, and inventory from hundreds more in the warehouseComment
-
you're not alone. We used to have about 5 good junkyards, but now there are only 2 - one on the reservation which is total crap (cars all over the place, overgrown with weeds/trees/blackberries) and another that is so overpriced you could buy the same parts new.Comment
-
Comment
-
yeah i found a silver front drivers side door. it's from a 1991 318i. im going to go see it tomorrow, it's an hour away.
does anybody know the ballpark figure of how much it'd cost to paint the door brilliantrot? what would be a fair rate?
also, if any of you have a tutorial on how to detach a door and reattach, it'd be greatly appreciated if you could share that with me.
thanksComment


Comment