If you separate and pull the wiper motor out first, then the wiper rack is relatively easy to remove thereafter. No?
The WORST job on E30
Collapse
X
-
probably removing a wheel.
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
Comment
-
I haven't had to do the wiper linkage, so the worst for me was the top three tranny bolts on the M20 (as someone previously mentioned it) when replacing the throwout bearing.
Must be nice being able to reach them from the engine bay on the M10s and M42s...
1992 BMW 525iT Calypso
2011 Jeep WranglerComment
-
Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
Worst for me was replacing the front-to-back main brake hard line..
4-6 hours spent disconnecting the old/rusty fittings.
1-2 hours droping exhaust/DS/tank
2-3 hours spent bending up new line per bends in old crusty line
1-2 hours spent tweaking bends for good fit
1-2 hours replacing exhaust/DS/tank with new fuel hoses
It was an epic fight.
Also did the 3 fuel hard lines "while I was at it".. Was thanking god above that at least the fuel lines came pre-bent - but still took some tweaking for proper fit.Comment
-
I have a hard time driving mine.1974.5 Jensen Healey : 2003 330i/5Comment
-
DUDE. Horrible job, it took me six hours and I had the subframe dropped already. My old one was rusty as hell though, definitely an accident waiting to happen. If you ever do this job, replace EVERYTHING back there so you don't have to do it again anytime soon.
Last edited by andyman2487; 09-07-2011, 12:55 PM.Comment
-
If you have small hands, wiper transmission is relatively simple. On the other hand, if you have mans hands......your fucked.2001 silver/Blk 325 cabby. SOLDOriginally posted by codyep3I hope to Christ you have looks going for you, because you sure as fuck don't have any intelligence.
1988 Blk/Blk e30 factory wide body kit car SOLD
1992 DS/BLK 325 m-tech II apperance pack cabby SOLD!
2002 325xit Sil/blk. SOLD
2012 328i xdrive touring. Wht/blk. SOLD
2009 135 cabby. monacoblue/blk leather SOLD
2007 Z4m coupe. Silver grey/black/ aluminum. 1of50
2010 F650gs twin
2016 M235i cabby. Mineral grey/Red leatherComment
-
Yep. Had some fresh (not even used stuff) next to my face for a bit this weekend.. WORST SMELL EVER
That goes close to the top of the list. Especially original, northern cars for sure.
Damn it man!! Why do you have to ruin my mojo! I've been sitting on a mono wiper kit for over a year now and I was just trying to get motivated to due it this summer.
Looks like it's going to be another year...
Comment
-
Worst for me was replacing the front-to-back main brake hard line..
4-6 hours spent disconnecting the old/rusty fittings.
1-2 hours droping exhaust/DS/tank
2-3 hours spent bending up new line per bends in old crusty line
1-2 hours spent tweaking bends for good fit
1-2 hours replacing exhaust/DS/tank with new fuel hoses
It was an epic fight.
Also did the 3 fuel hard lines "while I was at it".. Was thanking god above that at least the fuel lines came pre-bent - but still took some tweaking for proper fit.
gotta love the nickel copper lines....screw one fitting into its spot, then bend by hand, I bought mine about 2 inches long or so just in case my bends weren't perfect....but man what a relief, went in so damn easy...i can't imagine what you went through.1991 318is --- currently not road worthy
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing?Comment
-
-03/2005 E46 330D Touring 6spd(204hp/410nM) Sapphire Black/Naturbraun Sport...300k KM & 35mpg(mixed)Comment
-
Top tranny bolts are easy. Just use a swivel socket and a swivel and a lot of extentions and a long ratchet and it can be done with the ratchet by the out put shaft.
Wiper motor arm largest PITA for sure. I am scared cause mine has seen some abuse. Though dropping the oe exhaust with one person and a lift can be a challenge.sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713Comment
-
Replacing three used motors inside of three months time in my car. All the motors were under warranty (no labor warranty though).Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
garage queen 91 bmw 325is / 1972 Chevy El Camino 355 sbc 450hpComment
-
Wiper mechanism is definitely a HUGE BITCH!! I was so pissed off when I replaced mine. Yes, it is possible to remove the motor and linkage with the fan plastic fan housing in place, because I did it. Its just a huge pain in the ass, the thing barely fits in there at all.
I never want to do it again.Comment

Comment