How to remove door sills???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ADCD875
    Advanced Member
    • Dec 2008
    • 115

    #1

    How to remove door sills???

    I have a 1991 318is that I need to remove the carpet. How can I remove the door sills? They move (slide) back and forth but won't budge upwards. Should I just pry them up? Worried that I'd break them...

    Thanks for any help..
  • kevdeno
    Member
    • Jul 2006
    • 45

    #2
    They are extremely tight. Breaking is common. Get the right tool, like a panel tool, to get under there and pry up on the white clips. If you have to break anything, break the clips. They can be replaced more easily. Though you'll probably have to order them online since the local Autozone/O'Reilly's/Advanced won't have them.

    And whatever you do, don't even try to remove them in the cold. The plastic will break it's so brittle.

    Just go slowly and don't apply too much pressure to the black plastic.

    Worst case scenario, you'll have to buy replacements on ebay or something.

    Comment

    • Streichholzschächtelchen
      E30 Mastermind
      • Jan 2009
      • 1670

      #3
      Tear them off, go to pick n pull, tear them off more cars, accumulate clip things, replace, no headache or time wasted.
      Jah bless! :pimp:

      Comment

      • freeride53
        R3V OG
        • Jul 2007
        • 11972

        #4
        Yeah I broke 2/4 of mine... it's pretty hard, even with being carefully.

        1991 BMW 318i (Old Shell RIP, Now Being Re-shelled & Reborn)
        1983 Peugeot 505 STI
        1992 Volvo 240 Wagon
        2009 Toyota 4Runner SR5 Sport 4WD

        Comment

        • F34R
          sLaughter
          • May 2009
          • 12385

          #5
          Two long flathead screw drivers, it is fucking easy to get them off.
          ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

          Instagram: @BWeissLeather

          Current cars:
          ~ '87 325 M30B35 swap
          ~ '87 535
          ~ 01 540 Msport 6spd
          ~ '06 X5 4.8is

          Comment

          • Streichholzschächtelchen
            E30 Mastermind
            • Jan 2009
            • 1670

            #6
            Too much thinking involved for r3v.
            Jah bless! :pimp:

            Comment

            • Streichholzschächtelchen
              E30 Mastermind
              • Jan 2009
              • 1670

              #7
              How the fuck do you expect half the members on this adhd ridden forum to track down and keep a hold of two screw drivers at once?
              Jah bless! :pimp:

              Comment

              • Raxe
                R3V Elite
                • Nov 2006
                • 5346

                #8
                Same way as the door moldings, just apply steady upwards pressure and it will pop off.

                >> 1988 3.1 ITB E30 /// 2002 E46 M3 6MT / 2008 335xi 6MT / 1991 S38B36 E30 (sold)

                Comment

                • ADCD875
                  Advanced Member
                  • Dec 2008
                  • 115

                  #9
                  Thanks everyone.. They are $18.00 a piece at Pelican. I will try not to break them but if I do, oh well..

                  Comment

                  • Bey
                    E30 Addict
                    • Jul 2008
                    • 479

                    #10
                    They break all the time. Just go to the junkyard and get your replacement clips there for under a buck.

                    RIP

                    Comment

                    • Jand3rson
                      Banned
                      • Oct 2003
                      • 37587

                      #11
                      Pull them straight up, don't worry about breaking them.

                      If they snap in half, now you have a legitimate excuse to get M-Technic ones. :D

                      Comment

                      • dogsbark26
                        E30 Addict
                        • Nov 2008
                        • 533

                        #12
                        I thought they were supposed to slide off!

                        I just slid toward front till back clip was free, then slid toward back till front clip was free. From there it was easy to slide out of the rest of the clips.

                        Comment

                        • ADCD875
                          Advanced Member
                          • Dec 2008
                          • 115

                          #13
                          I broke both sides!!! Oh well.. Where do I get the M-Technik ones?

                          ;-)

                          Comment

                          • bernzpeed
                            No R3VLimiter
                            • Feb 2009
                            • 3917

                            #14
                            take the bottom rear seat out and slide it out. duuhr.
                            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
                            ---------------------------------
                            89 E30 S52
                            ---------------------------------
                            Transaction Feedback.

                            Comment

                            Working...