After many weeks, the E34 RD header installation on my car is finally complete :D. I just picked up the car tonight and snapped up some quick pictures:
I'm not too sure how well the thermal coating is working since the engine bay is getting really hot. There is still a little clean-up to be done with the engine wiring harness and A/C lines but that can be done later. I've only taken it up to about 4500 RPM, but there is clearly much more pull after around 3k or so.
I also installed a dual-in/dual-out cat with a custom muffler. Here are the tips:
I'll probably move the expansion tank and take better pictures of the headers tomorrow. And for all you do-it-yourselfers out there, don't try this install at home.
Fred
I'm not too sure how well the thermal coating is working since the engine bay is getting really hot. There is still a little clean-up to be done with the engine wiring harness and A/C lines but that can be done later. I've only taken it up to about 4500 RPM, but there is clearly much more pull after around 3k or so.
I also installed a dual-in/dual-out cat with a custom muffler. Here are the tips:
I'll probably move the expansion tank and take better pictures of the headers tomorrow. And for all you do-it-yourselfers out there, don't try this install at home.
Fred
Comment