alen screw stripped !!!!!!!!!!

[asubimmer]

don't screw it up. They make tools just for stuff like this. They are called turbo's and they fit over the outside of the head and grip onto it. You can cut a slot in it but thats gonna be a PITA if it breaks etc. Do it right and save yourself the time ;)

[german g]

If you have a dremmel you could cut cut a slot in the screw head to fit flat screwdriver.
Easy out should work if you can get drill in there.
Good luck.

YOU WIN!!!! That was the only way that worked for me..that bitch was in there TIGHT..Thanks dude.

[e30tom]

Everybody working on old cars should have these:

Craftsman Bolt Remover

And a set of these.

[asubimmer]

^^1st link is the "turbos" I was talking about. They are awsome

[e30tom]

^^1st link is the "turbos" I was talking about. They are awsome

Yup. Saved my a** a number of times.

[german g]

Yup. Saved my a** a number of times.

i'm buying a set this weekend, the dremmel fix was pretty sketchy.

[arsevader]

http://www.r3vlimited.com/board/showthread.php?t=75921

It's a spring clip FI plug just like every other plug of its type on this engine.

Just push the metel clip in and yank on the plug.

[german g]

It's a spring clip FI plug just like every other plug of its type on this engine.

Just push the metel clip in and yank on the plug.

Yea, my dumb ass finally figured it out. The plug was on upside down, so I couldn't see the clip..

thanks

[arsevader]

Yea, my dumb ass finally figured it out. The plug was on upside down, so I couldn't see the clip..

thanks

Ah

Yeah it's done like that so you can't plug the wrong plug into the wrong port.

[german g]

Ah

Yeah it's done like that so you can't plug the wrong plug into the wrong port.

that makes sence (embarrased smiley)

Well, im off to get my headers and exhaust put on