What would your project car be..........

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob
    Moderator
    • Oct 2003
    • 8166

    #31
    I'd have to go with the superperformance S1 roadster with the S2000 drivetrain. Toda cams and an AEM ecu, money.
    BEERTECH

    Comment

    • Liqued12
      Member
      • Oct 2003
      • 74

      #32
      MkI with a VR6 droped to the ground with Some deep dish wheels, or an E30 with s50, or turbo M20 also dropped to the ground with deep dish.

      Comment

      • Brew
        No R3VLimiter
        • Oct 2003
        • 3060

        #33
        Noble M12 with a BMW F1 drivetrain. :twisted:
        '91 318is
        sigpic

        Comment

        • CiLK WuRM
          Grease Monkey
          • Oct 2003
          • 371

          #34
          E30 M3 with Mclaren F1 S70/2 motor. With the ram tunnels sticking out of the bonnet.

          Realisticly?

          And S13 silvia, with S15 front end, and Type-X rear end. With an RB26DETT GTR N1 block, bored to 3.0L, and running twin Trust T88-34D turbos.

          Comment

          • BrianF 88iS
            Mod Crazy
            • Oct 2003
            • 669

            #35
            Originally posted by CiLK WuRM
            E30 M3 with Mclaren F1 S70/2 motor. With the ram tunnels sticking out of the bonnet.
            Would that even fit?
            But if that was possible, that would make one fast car :shock:

            Comment

            • Charlie
              kid tested, administrator approved
              • Oct 2003
              • 6686

              #36
              Originally posted by BrianF 88iS
              Originally posted by CiLK WuRM
              E30 M3 with Mclaren F1 S70/2 motor. With the ram tunnels sticking out of the bonnet.
              Would that even fit?
              But if that was possible, that would make one fast car :shock:
              I'm sure it could be made to. The S70/2 is based off the motor in the 850csi, which is based off the old BMW V12, and we've seen it shoehorned into an e30.

              Easiest way would be to just cut the entire front clip of the car off and tube frame it.

              -Charlie
              Swing wild, brake later, don't apologize.
              '89 324d, '76 02, '98 318ti, '03 Z4, '07 MCS, '07 F800s - Bonafide BMW elitist prick.
              FYYFF

              Comment

              • CiLK WuRM
                Grease Monkey
                • Oct 2003
                • 371

                #37
                the Mclaren motor is 60cm long. It would fit better than an M30.

                Comment

                • randomtask37
                  No R3VLimiter
                  • Oct 2003
                  • 3154

                  #38
                  Originally posted by randomtask37
                  Of course this is in a dream world....

                  2003 m3
                  2002 impreza wrx
                  2000 s2000
                  1999 eclipse gsx
                  1997 supra twin turbo
                  1996 300zx twin turbo
                  1994 MR2 turbo
                  early 90's miata
                  e30 m3
                  shelby cobra
                  shelby mustang
                  brand new elise

                  there are defintally more, but thats all i can think of for now.
                  ok you bastards ;) dont like my taste, ill slim my choice down to 2 and they will fit your criteria of an older car.

                  there is something about older miatas that just really makes me happy =]
                  if i could i would make something like this.


                  and if that is still too new for you guys, then how about an old 911... huh?!?! talk shit about old 911's and some enthusiast might come to your house and kill you.
                  something like this


                  btw, with both those i would start from scratch and make something BETTER than those, and a little more to MY taste.
                  98 M3/4/5

                  Comment

                  • AndrewBird
                    The Mad Scientist
                    • Oct 2003
                    • 11892

                    #39
                    Originally posted by UNHCLL
                    MGB-GT with S2000 engine
                    Not a bad idea! I have a 1970 MGB-GT that that would be fun to do to. It would take some work though.

                    My dream build would be a this:



                    With a 7.0 liter LS1...




                    Drool....

                    Andrew

                    Comment

                    • OOMPH!
                      No R3VLimiter
                      • Oct 2003
                      • 3487

                      #40
                      This shell is for sale.....If I could afford it I would be all over it.....

                      This is sex on wheels.....ahhh porsche 928 wheels

                      SOLD: My feature http://www.stanceworks.com/2012/04/a...ss-bmw-e30-m3/

                      Comment

                      • Jand3rson
                        Banned
                        • Oct 2003
                        • 37587

                        #41
                        I love the wheels on that yellow MkI sitting next to your desired shell. Anyone know what they are?

                        Comment

                        • OOMPH!
                          No R3VLimiter
                          • Oct 2003
                          • 3487

                          #42
                          Originally posted by Eurospeed88
                          I love the wheels on that yellow MkI sitting next to your desired shell. Anyone know what they are?
                          They look pretty damn close to the "RFX" wheel made by Revolution

                          looks like the guy with the GTI primered them though..... :?

                          SOLD: My feature http://www.stanceworks.com/2012/04/a...ss-bmw-e30-m3/

                          Comment

                          • Kavkazia
                            Grease Monkey
                            • Oct 2003
                            • 394

                            #43
                            Porsche 911 Turbo, Black.
                            95' M3.
                            90' 325i Turboed.
                            87' 325eS Fixed.

                            Comment

                            • Streetspec_iS
                              E30 Mastermind
                              • Oct 2003
                              • 1622

                              #44


                              e24 633, techno violet, decked on charcoal Simmons OM18s , with a built to the hilt M52b28 alloy block.

                              yeah thatd be cool, and realistic too.
                              sigpicM42 Brigade ... Throwing craze in the 318

                              Comment

                              • Jand3rson
                                Banned
                                • Oct 2003
                                • 37587

                                #45
                                Originally posted by OOMPH!
                                Originally posted by Eurospeed88
                                I love the wheels on that yellow MkI sitting next to your desired shell. Anyone know what they are?
                                They look pretty damn close to the "RFX" wheel made by Revolution

                                looks like the guy with the GTI primered them though..... :?
                                Those rims are dead sexy. I want a set.

                                Comment

                                Working...