Alright, well I was planning on keeping it all a secret until everything was installed and completed on my car, but I have been bursting at the seams. Plus the fact that I need some help organizing the list of parts I need to purchase.
Well first off, my girlfriend bought me a tranny swap kit for my birthday/one year anniversary. So I've got a Getrag 260 etc. etc. sitting in my garage already. Once I get my parts car out of the garage, my car is going to go under the knife for a ton of parts. Here is a basic list:
These things will possibly come at the same time, but probably a bit later:
Way future plans include Ground Controls, massive weight reduction, and a couple bolt on engine mods.
If you have read this far, and can help me sort the parts for my tranny swap, please refer to this thread:
Well first off, my girlfriend bought me a tranny swap kit for my birthday/one year anniversary. So I've got a Getrag 260 etc. etc. sitting in my garage already. Once I get my parts car out of the garage, my car is going to go under the knife for a ton of parts. Here is a basic list:
- 5 speed conversion with a new clutch kit, lightened flywheel, new center support bearing, guibo, tranny mounts, shift linkage.
- Redline MTL Gear Oil
- Z3 1.9L short shift
- 4.10 limited slip diff
- Redline 75/90 Gear Oil
- All 4 Brembo brake rotors
- Mintex Redbox pads all around
- ATE Superblue fluid
- UUC brushed aluminum e-brake and shift knob with Rob's black suede boots
- Pair of Sparco Speed race buckets
- Sparco front strut bar
- Urethane subframe, control arm, and possibly differential bushings
- New (secret) front lip with smooth out valanced and all new paint below the bumpers
- Refinishing throwing stars with black centers and silver lips
These things will possibly come at the same time, but probably a bit later:
- Suspension Techniques Sway Bar set
- Falken Azenis tires for autocrossing
- M-tech II rear lip spoiler, like Jordan demonstated (without the upper wing part)
- Brullen exhaust
- Custom CF sunroof (just waiting for the mold to be made by my friend)
Way future plans include Ground Controls, massive weight reduction, and a couple bolt on engine mods.
If you have read this far, and can help me sort the parts for my tranny swap, please refer to this thread:
Comment