If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!
New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!
Hey thanks blunt tech!! Got my composite oil pan gaskets.
Anyone want to chime in and recommend anything else to check, fix, replace while I have the oil pans off? I notice the oil pressure light stays on for about 10 seconds when the engine is cold.
Looks like pelican parts had that dome light bracket. Part number 54-12-1-884-483-BOE and I bought the last two. They're in the mail with two brand new dome lights. YAYA!!
Got the new shift boot in the mail, just in time for a date, I even cleaned all the smegma off of everything. Don't know if she was impressed.
[ATTACH]86715[/ATTACH]
Sent from my iPad using Tapatalk
I cleaned my car completely inside and out for a date one time, and this is back when I had the e46... Yup, not impressed, or maybe just to dumb to notice.
I fixed the shifter with some stuff I found around the shop at work. A 3/4 white pinball rubber, (couldn't find black) an arcade token, I think it is actually for the machine that dispenses golf balls at a driving range, black paint pen and some super glue. I have a new shift boot waiting for me at home in the mailbox.
New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!
I started the day wanting to install my subwoofer, boy was that a mistake!! I pull the battery out just to poke around and look for a place to pass the amp power and I see the full extent of the rust. It's through the battery tray and through the shock tower. Gross.
Yay for rust and shit breaking.
He's fish hookin it!
Scraped most of the rust off and sprayed with with some rustoleum. Still need to see how screwed it is underneath.
After all that I got sidetracked again with the access panel to the HVAC fan, I need to fix the resistors since the fan only works on 4. I take it out, use a fiber file to clean the contact on the little thermal switch, foamy foam and wash the thing, then spray it down with contact cleaner. Reinstalled it and it works like a charm!
While exploring where to run the amp power I recall SE1 saying the door sill trim is held on with these annoying little clips that usually break when you touch em, like everything else on this car. Well I was able to pull the trim off, no broken plugs, but they're all still stuck in the door sill. Yuck. So I start trying to pop em out, using screw drivers, di cutters, vice grips, these things ARE NOT made to be removed. So I broke about three of them out shit flying off in a comedic fashion hitting me WAY TOO CLOSE to the eye balls, and poked around more and there isn't even a place made to run the wire!! So I put it all back together and called it a day. Luckily I just bought some of those green clips that hold the door cards on, they're a great fit for the door sill trim, just gotta cut off a little bit to fit them in the slot on the trim, they hold well!
I didn't get any more pics or anything fun to share, but next time I should have the sub installed and the water pump maybe done. Still no oil pan gaskets, priorities right?! But blunt is getting back to me about fiber gaskets. Yay!
Leave a comment: