New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    So the old speakers in the rear are one e34 and one e34 DVC.
    Click image for larger version

Name:	ImageUploadedByTapatalk1411864225.271016.jpg
Views:	1
Size:	43.8 KB
ID:	7169751

    I got one from the junk yard, so now I have two. These are supposed to be better than the regular e34 right?
    Click image for larger version

Name:	ImageUploadedByTapatalk1411864236.189498.jpg
Views:	1
Size:	32.1 KB
ID:	7169752


    The fronts are regular e30 speakers. I keep reading that "all e30s are wired for tweeters" but I took the door apart and looked behind then kick panel and there are no tweeter wires.

    Is it fine to mount the crossover (inductor) close to the magnet?
    Last edited by Navarone; 09-27-2014, 05:27 PM.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Got all my components for the speaker upgrade!

    From e34. I'll be swapping the silk dome tweeters into the front and the e30 premium tweeters into the rear.
    Click image for larger version

Name:	ImageUploadedByTapatalk1411857153.442484.jpg
Views:	1
Size:	40.4 KB
ID:	7169744

    From e30 and crossover parts from parts express.
    Click image for larger version

Name:	ImageUploadedByTapatalk1411857092.526235.jpg
Views:	1
Size:	42.3 KB
ID:	7169743
    Last edited by Navarone; 09-27-2014, 02:42 PM.

    Leave a comment:


  • Navarone
    replied
    So those exhaust donuts I bought are already cracking and stuff, pretty lame! I'll get a pic later.

    Leave a comment:


  • Navarone
    replied
    Originally posted by golde30
    Mite as well have run the battery to the rear like a later model, then amp wiring is cake walk, and get to clean up engine bay.

    I'm using the battery to hide what's left of the rusty battery tray.

    Leave a comment:


  • golde30
    replied
    Mite as well have run the battery to the rear like a later model, then amp wiring is cake walk, and get to clean up engine bay.

    Leave a comment:


  • 2mAn
    replied
    It will probably be a lot louder if the box was right up against the ski-pass hole.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Hrm, I'll try that! The bottom of the box is carpeted too so I was thinking put two hook sides of Velcro back to back and put that under the box. I was also thinking about using some small 2" angle brackets with hook Velcro on both sides and put a few around the bottom of the box.

    It's not like I Tokyo drift or anything, but I drive a little hard, and the roads around here are pretty bumpy. Thanks

    Leave a comment:


  • Zreberlcoe
    replied
    use velcro/sticky tape for the sub. Sticky part on the bottom of the box, velcro to the carpet.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    I took the amp off and mounted it on the other side so that it was hidden, and to get some airflow from the port for cooling. I had to drill a new hole for the speaker wire and seal up the old one with some hot glue. The amp is a Jensen power 400 and the sub is a vintage JL audio 10w4. The box is this funky bandpass that has the diver firing into ~1cu-ft and the rear into ~1.5cu-ft with a port as wide and deep as the box.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410999276.946451.jpg
Views:	1
Size:	36.0 KB
ID:	7169565

    Still a decent amount of room in the trunk! I want to mount the sub so it doesn't slide around, any ideas?
    Click image for larger version

Name:	ImageUploadedByTapatalk1410999292.761582.jpg
Views:	1
Size:	33.6 KB
ID:	7169566

    When I get a ski passthrough I should be able to sneak a fishing pole past the sub. Here's a random pic of where I like to fish, just because.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410999414.187456.jpg
Views:	1
Size:	106.4 KB
ID:	7169567
    Last edited by Navarone; 09-17-2014, 04:47 PM.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Sub port fires right into the hole.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998948.175599.jpg
Views:	1
Size:	30.4 KB
ID:	7169564

    Sounds really good, but volume could be better, and the trunk rattles. Blergh. The same sub in the matrix, which is all open like a wagon, was fn loud!

    Just where I ran the wires.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998891.888682.jpg
Views:	1
Size:	39.3 KB
ID:	7169559

    More wire.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998912.472729.jpg
Views:	1
Size:	40.4 KB
ID:	7169561
    Last edited by Navarone; 09-17-2014, 04:40 PM.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Here's the transition to the seat.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998269.885286.jpg
Views:	1
Size:	39.6 KB
ID:	7169554

    And inside the trunk. Everything in his damn car is sticky and crumbly.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998292.936933.jpg
Views:	1
Size:	36.4 KB
ID:	7169555

    That's a 30A quick disconnect. I need to attach better quick disconnects to the amp remote turn on wire, spade connectors are annoying. I like it to all be easily removable.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998315.722508.jpg
Views:	1
Size:	34.5 KB
ID:	7169556

    I just took a hammer and a flathead and tapped on the little welds and they popped right out.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998384.160885.jpg
Views:	1
Size:	35.2 KB
ID:	7169557

    I also traced and cut out a hole in the card that covered the metal thingy. I didn't take out the seat back, I just measured from the mounting holes to the ski hole then put the removed piece on the cardboard at those measurements and traced that.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998433.631852.jpg
Views:	1
Size:	32.6 KB
ID:	7169558
    Last edited by Navarone; 09-20-2014, 10:49 PM.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Installed my subwoofer today, sounds pretty good! It was about 250° outside, I was sweating gallons through my daisy duke cutoffs.

    Punched out the rear battery cable hole right next to my front mounted battery and pulled 8awg through.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410997819.780748.jpg
Views:	1
Size:	35.4 KB
ID:	7169549

    Falls right into the cabin. I pulled off the entire carpet piece behind the speaker and there was a channel to run the wire through.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410997872.834070.jpg
Views:	1
Size:	36.0 KB
ID:	7169550

    No grommets so I just gaff taped the edge. I'll buy a real grommet before it rains.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410997899.002891.jpg
Views:	1
Size:	39.1 KB
ID:	7169551

    Pulled up the door sill trim and putty knifed the rubber-ish stuff to expose the wire loom and ran all the wires through the factory clips. The glue was soft and sticky, probably from the heat, and the rubbery stuff broke really easily.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998024.398296.jpg
Views:	1
Size:	40.4 KB
ID:	7169552

    I know you shouldn't run audio signal next to power but my signal cable was too short to run on the other side. When I upgrade the rest of the speakers I'll run new signals down the left side.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410998104.620813.jpg
Views:	1
Size:	37.6 KB
ID:	7169553
    Last edited by Navarone; 09-17-2014, 04:44 PM.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Got a new door lock in. Now it locks and 90° double locks!!
    Click image for larger version

Name:	ImageUploadedByTapatalk1410585373.435218.jpg
Views:	1
Size:	32.1 KB
ID:	7169446

    This forked piece was bent too.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410585414.020481.jpg
Views:	1
Size:	30.6 KB
ID:	7169447

    And I bought a bunch of door card plugs so I replaced a few more that were broken.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410585455.957820.jpg
Views:	1
Size:	34.9 KB
ID:	7169448
    Last edited by Navarone; 09-13-2014, 10:22 PM.

    Leave a comment:


  • Navarone
    replied
    Wired, installed and working.

    It makes such a HUGE difference, I highly recommend adding a dome light. It's wired in parallel with the door lights, so it has Door-Off-On settings. I wouldn't use it while driving, it's aimed right at your face. Maybe I'll make a visor for it.

    Off


    On


    I also wired the LEDs, and they're pretty awesome, but I haven't mounted them yet. I need a way to aim them better. The light output is pretty good. They're 25° spread and 8-12k mcd. Right now they're always on, I'll probably add a dimmer switch and a few more LEDs, if I can aim them that would be the best! Maybe I'll run them off the headlight dimmer, but I don't want to run that wire, sounds annoying!
    Click image for larger version

Name:	ImageUploadedByTapatalk1410490437.309044.jpg
Views:	1
Size:	30.7 KB
ID:	7169425

    Attached Files
    Last edited by Navarone; 09-11-2014, 08:00 PM.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    I installed a convertible dome light in the warning light panel!
    Click image for larger version

Name:	ImageUploadedByTapatalk1410483800.977320.jpg
Views:	1
Size:	35.8 KB
ID:	7169420

    Chopped the side off and dome light fits right in. There's a little gap that I'll fill with a tab of abs or something.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410483895.435220.jpg
Views:	1
Size:	34.3 KB
ID:	7169423

    I'll test it when the sun goes down.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410483829.313072.jpg
Views:	1
Size:	29.6 KB
ID:	7169421

    I also bought some LEDs and housings for a tiny bit of red accent lighting. They'll be mounted left and right of the crank or something. Or maybe I'll mount them in the panel so I'm not drilling holes in harder to fix stuff.
    Click image for larger version

Name:	ImageUploadedByTapatalk1410483871.816230.jpg
Views:	1
Size:	37.2 KB
ID:	7169422
    Last edited by Navarone; 09-18-2014, 11:48 AM.

    Leave a comment:

Working...