Announcement

Collapse
No announcement yet.

Project Frankenstein. . My journey with my E30's

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #76
    Originally posted by animal View Post
    Nice work
    Thanks man :up:

    Originally posted by CorvallisBMW View Post
    Awesome! I love this car.

    As far as front strut mounts, do you want adjustability? If so I'm a fan of the Vorschlag mounts. Ground Control also makes good ones. If you're not concerned about adjustability, plain old OEM would be fine.
    Thanks for the kind words! :D

    I think I will check out the adjustable mounts as I'm not sure these 9J's will fit under the front arches with the new set up :? lol

    OEM was always my first choice but I have also heard that E90 top mounts are usable and it lowers the front a touch more but I may need a bit more research before doing that!

    "When Passion and Skill work together..the end result is often a masterpiece. ."
    Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

    Comment


      #77
      Not fitted anything yet but went out on the weekend and took a pic (as usual )


      "When Passion and Skill work together..the end result is often a masterpiece. ."
      Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

      Comment


        #78
        Slight Update!

        So I started off my Sunday in the engine bay as the last time I was cleaning up in there I noticed this and thought it was best I replaced it ASAP :o







        Also while I was in that area I decided to change this ballooned and tired looking pipe! Good thing I did as it was getting VERY close to the water pump pulley :o







        That's better! 8)





        Bled the system and finished off my sunday at a local car meet 8)


        "When Passion and Skill work together..the end result is often a masterpiece. ."
        Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

        Comment


          #79
          Update time!

          Ok so I planned to get the Bilstein B12 kit on today as the weather was perfect!

          The stash 8)


          (All genuine top mounts / spring pads etc)

          How it stood :o



          Removed the old and Fertan'd the body as you do 8)



          Got to work with the new set up!

          Safe to say they needed replacing :o





          The end product 8)


          (E46 M3 rear top mounts used)

          fitted :D



          and this is where my day got annoying!

          I took the front end apart...removed the springs and was left with this absolute ba$tard! :x



          I couldn't get it to budge no matter what I did! and I have a limited amount of tools at my disposal at home so I think a trip to work is needed to remove them!

          I was gutted as I was looking forward to getting it all back together and enjoying some of the sunshine, but it wasn't to be!

          I also cleaned up and sprayed my E46 rack ready to fit but after the annoying front struts I lost motivation! :roll:







          I'm hoping for next weekend now! Fingers crossed the weather is still good! :roll:

          "When Passion and Skill work together..the end result is often a masterpiece. ."
          Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

          Comment


            #80
            Awesome, I bet it rides better than ever

            Comment


              #81
              Originally posted by CorvallisBMW View Post
              Awesome, I bet it rides better than ever
              I can't wait to find out! :)

              "When Passion and Skill work together..the end result is often a masterpiece. ."
              Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

              Comment


                #82
                any updates??
                I BUY/SELL REFURBISHED CM5907s & CM5908s

                HOWTOs:
                DB vert plastic bumpers
                OEM Keys
                MTech1 docs

                88 ix Lach/Card
                91 ic Calypso 3.1
                86 Cosmo 2.7

                OEM+ or bust!


                reelizmpro: I will always be an e30 guy.. I still do all of my own labor
                TrentW: There's just something so right about a well-built M20 in an E30
                e30m3s54turbo: I save my money for tuner parts.

                Comment


                  #83
                  Originally posted by bradnic View Post
                  any updates??
                  It's been a busy week so none as of yet!

                  If all goes well this Sunday should be the day! 8)

                  "When Passion and Skill work together..the end result is often a masterpiece. ."
                  Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

                  Comment


                    #84
                    Update time! :D

                    So I finally got the threads out and this is how I achieved it



                    and with the new B8's installed



                    I think it's safe to say the top mounts/ cups were shot! :o







                    All back together 8)



                    fitted :D



                    I also attempted to fit my E46 steering rack but was stopped by the exhaust manifold being right in the way :(

                    I know see why people cut the flange and reweld at a 90-degree angle.. That will be addressed one day!



                    The finishing touch was getting rid of the Aero type wiper blades from some proper old school Bosch super's!



                    Test drive time came and all I have to say is WOW! :o I really didn't think a convertible was able to handle that well but the B12 kit is amazing!!

                    Definitely recommend it to anyone looking to upgrade their suspension without going coilovers!

                    How she sits atm! A bit too high for my likings so maybe a bit more sidewall in the tyres are needed when it fully settles!











                    Ended up at a car meet with a few friends! 8)








                    "When Passion and Skill work together..the end result is often a masterpiece. ."
                    Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

                    Comment


                      #85
                      Slight Update peeps! :D

                      It's been a busy weekend with the 30!

                      Been out with the top down non-stop since Friday night and have been loving every minute! 8)

                      The only thing that was doing my nut was how loud the exhaust is!

                      I've had this powerflow back section sitting in my garden for ages so I decided to fit it! The backbox itself isn't in the greatest condition but it will do until I get something custom made up for it!

                      It sounds so much more refined now! When im cruising i can hear passengers and music instead of having to shout all the time :chuckle:

                      The M30 still howls like a beast when I put my foot down! :twisted:







                      Went to a couple of car meets aswell! 8)






                      "When Passion and Skill work together..the end result is often a masterpiece. ."
                      Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

                      Comment


                        #86
                        Eren,
                        the arse needs lowering
                        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                        If you have bought items from me, please leave feedback below.
                        If you are a BUYER, Check My Feedback.:up:
                        http://www.r3vlimited.com/board/showthread.php?t=183860

                        Check out my Euro Build Thread
                        http://www.r3vlimited.com/board/showthread.php?t=215557

                        Comment


                          #87
                          Originally posted by rav320uk View Post
                          Eren,
                          the arse needs lowering
                          Mate the whole thing does!

                          40mm drop my arse!!

                          "When Passion and Skill work together..the end result is often a masterpiece. ."
                          Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

                          Comment


                            #88
                            And they still haven't settled?
                            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                            If you have bought items from me, please leave feedback below.
                            If you are a BUYER, Check My Feedback.:up:
                            http://www.r3vlimited.com/board/showthread.php?t=183860

                            Check out my Euro Build Thread
                            http://www.r3vlimited.com/board/showthread.php?t=215557

                            Comment


                              #89
                              yeah def still too high. I'm not a slammer in any way but that rear looks higher than stock :-)

                              i ended up with H&R sport cabrio springs after trying eibachs and others. also did not use e90 drophats. you're running a heavier M30 so a different front spring option is needed..
                              I BUY/SELL REFURBISHED CM5907s & CM5908s

                              HOWTOs:
                              DB vert plastic bumpers
                              OEM Keys
                              MTech1 docs

                              88 ix Lach/Card
                              91 ic Calypso 3.1
                              86 Cosmo 2.7

                              OEM+ or bust!


                              reelizmpro: I will always be an e30 guy.. I still do all of my own labor
                              TrentW: There's just something so right about a well-built M20 in an E30
                              e30m3s54turbo: I save my money for tuner parts.

                              Comment


                                #90
                                Originally posted by rav320uk View Post
                                And they still haven't settled?
                                Its been a few weeks and I'm sure its higher everytime I see it


                                Originally posted by bradnic View Post
                                yeah def still too high. I'm not a slammer in any way but that rear looks higher than stock :-)

                                i ended up with H&R sport cabrio springs after trying eibachs and others. also did not use e90 drophats. you're running a heavier M30 so a different front spring option is needed..
                                Same here man, I've got no intention of slamming it just want a reasonable arch gap.. :???:

                                I had this exact same conversation with my friend and I am now considering H&R sport springs.. Was yours a 60mm drop?

                                Also do you have any pics?

                                Thanks :up:

                                "When Passion and Skill work together..the end result is often a masterpiece. ."
                                Project Frankenstein :twisted: http://www.r3vlimited.com/board/showthread.php?t=359297

                                Comment

                                Working...
                                X