LS1/T56 Inside. The Bogan Boat.

[Hooffenstein HD]

Do the typical Aussie thing and turbo it to like 1300hp and just shred tires with it haha.

A twin turbo set up has crossed my mind but honestly, I'd much rather a sensible 400rwhp. Mild cam, lifters, valve springs, OTR intake and a good tune should get me there.


This is who I bought the ute from in his old ute.

[Hooffenstein HD]

So here's the problem.




Solution. Fresh built BW M80 with full spool and 4.11 gears. Cost way too much but it won't randomly single peg on me now.


Installed with the billet diff mount.


Exhaust was off for ease of removal/installation so thought I'd bash out the blocked cats while I was at it.


Also removed this heavy bastard. Must have been close to 15kg.
[

[2mAn]

It Should be followed by "testing" the new diff with some 11s

[Hooffenstein HD]

It Should be followed by "testing" the new diff with some 11s

Can do.


Was told to run the diff in a bit first but I imagine some skids should do that just fine.

[TheTacoMan]

Can do.


Was told to run the diff in a bit first but I imagine some skids should do that just fine.

Do it.

[Hooffenstein HD]

Found this cool video of an El Camino doing a quick second gear clutch drop in Mexico.

[2mAn]

Found this cool video of an El Camino doing a quick second gear clutch drop in Mexico.

haha bravo!

[Hooffenstein HD]

When I got the ute, the handbrake wouldn't even work to park the car. I've put new shoes in the internal drums, tightened the cables etc and it lasted all of about 3 handbrake entries into a tight hair pin.

Solution.

[lambo]

Seems reasonable.

[Kershaw]

Looks like a pretty handy solution.

[DREWHALL]

Looks like a pretty handy solution.

Huzaa!

[Hooffenstein HD]

Typical ute fashion, "stockies" on the back because I trashed the tyres on the 17x8's. Stockies are actually 318ti M sport wheels.