My car was at the shop- it's done now! I was getting the AFM readjusted but also getting the transmission dowels put in so my starter will be better aligned, it was noisy before, now it's nice and quiet.
Apparently I had set it too rich, so the oxygen sensor was overcompensating and leaning it out a ton. Now everything is good, and apparently pulls waay harder above 3k. Am super excited to check it out after work! I might just take it straight to the smog place after.
2.8L M20 9.8:1 stroker build: my 323i reincarnated
Collapse
X
-
-
Happened to have a DA polisher lying around so I thought I'd try my hand in some paint correction.
Washed, clayed, took before pictures, medium cut 6" foam pad + Harbor freight DA + Meguires 205, then wax.
Results
Hood before
Hood after
It looks even better in person, super deep and shiny. I dropped it off at the shop right after, not sure what they'll think lol. Some fine quality turd polishingLeave a comment:
-
Can’t wait to see the dyno and what it takes to pass emissions. Good luck!Leave a comment:
-
Emissions results. Looks like it's running stupidly lean. Passed everything except the NOx.
Gonna have my local shop tune the AFM Friday and I'll bring it back in for the retest. Should get me quite a bit more power too :D
Leave a comment:
-
Don't get me wrong... the exhaust is exactly what I was looking for haha. I can hear the motor itself much better now.. when it's tame, it sounds like a 325i, but when you get higher in the rev range it clearly isn't.
With the headers and an intake, it will give me all the right noises but none of the drone.
Soon after smog I think I'll be looking into dyno shops. I'm thinking it'll be neat to do before/after for the headers and an intake.
glad this thing is running smoothly. Very curious about headers and intake power numbers..if anyLeave a comment:
-
With the headers and an intake, it will give me all the right noises but none of the drone.
Soon after smog I think I'll be looking into dyno shops. I'm thinking it'll be neat to do before/after for the headers and an intake.Leave a comment:
-
I’ve heard the IE exhaust was fairly quiet so this doesn’t surprise me. I almost bought the same one but wanted a little noise. Ended up with a Borla and I love the soundLeave a comment:
-
Looks like we did a similar build. I also did a 9.8-1 2.8 stroker m20. ~7k miles later and going strong. It will be interesting to see what kind of power you put down, I know I'm happy with mine.Leave a comment:
-
First time driving the car to work! Planning on going in for the smog check during lunch. Exhaust is installed and the thing is crazy quiet.
Leave a comment:
-
Would love to BS about cars with you, man :D
I have a new fender if need be but probably going to throw money at it until it's straight. I'm not too concerned, the damage is fairly minor at least compared to my old car.Leave a comment:
-
Damn. That pass side fender looks a bit mangled. I'll be in SJ during Christmas weekend, hopefully I will have a few mins to BS about cars E30s and life :rofl:
They live in deep Almaden, whereabouts are you?Leave a comment:
Leave a comment: