92 Mtech cabrio...with Tesla power

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jon volk
    replied
    There’s 3 motor mounts and the battery tray ties the floor together That mount is also right in between the rear seat and trunk firewalls so it doesn’t have much chance to flex.
    Last edited by jon volk; 01-04-2019, 05:19 PM.

    Leave a comment:


  • E30SPDFRK
    replied
    Are you adding some reinforcements to the trunk floor above that mount? Seems like all the torque will be pushing up directly on the single ply floor.

    How far back are the output's of the diff compared to stock in that position?

    Leave a comment:


  • jon volk
    replied







    Sent from my iPhone using Tapatalk

    Leave a comment:


  • jon volk
    replied
    I’m more concerned with performance than range. The Volt batteries will support 1200 amps continuous for a period.
    Last edited by jon volk; 01-04-2019, 03:13 AM.

    Leave a comment:


  • jeffnhiscars
    replied
    Several ago at the Blue Ridge BBQ in Asheville, there was an e30 with a forklift engine in it. If I can find the pic I'll post it but it was certainly an interesting car. I think he said he got 25-50 miles from a charge

    Leave a comment:


  • jon volk
    replied
    It’ll be around 100 miles. I’m using two Chevy volt packs, not Tesla stuff. I wasn’t willing to pay $18k for batteries.

    Leave a comment:


  • 2mAn
    replied
    Originally posted by jon volk
    No. Itll be the same or lighter than the LS swap at 3150lbs.
    Motor is 295lbs, battery is about 600 between all the modules.
    Will that still have the same range as the Tesla did? I thought they had quite the battery pack

    Leave a comment:


  • jon volk
    replied
    Originally posted by 2mAn
    So will this thing be the heaviest E30 when its done?
    No. Itll be the same or lighter than the LS swap at 3150lbs.
    Motor is 295lbs, battery is about 600 between all the modules.

    Leave a comment:


  • 2mAn
    replied
    So will this thing be the heaviest E30 when its done?

    Leave a comment:


  • Court M3
    replied
    Been following this for awhile now on IG. Loving the progress on this build

    Leave a comment:


  • jon volk
    replied
    Originally posted by lukeADE335i
    Agreed - especially once model 3s start getting crashed in decent numbers :)

    The battery packs look like they'll be a neat fit! Is the gear selector just for show or will it be used to select forward / reverse?
    293 likes, 22 comments - Jon Volk, formerly tesla_bimmer (@depreciated.i8) on Instagram on December 20, 2018: "F-N-R"

    Leave a comment:


  • lukeADE335i
    replied
    Agreed - especially once model 3s start getting crashed in decent numbers :)

    The battery packs look like they'll be a neat fit! Is the gear selector just for show or will it be used to select forward / reverse?

    Leave a comment:


  • Staszek
    replied
    This is amazing!! Can't wait to see how this turns out. This is going to be the next generation of modding soon, the swaps will be electric once the parts get cheaper and the knowledge is there.

    Leave a comment:


  • reelizmpro
    replied
    Awesome. It's clear this is THE swap of all swaps. I'd imagine a ton of additional reinforcement would need to be done to make sure the body can handle it. Hats off to you for grabbing the bull by the horns.

    Leave a comment:


  • pandaboo911
    replied
    inb4 tesla haters come out of the woodwork. Oh wait too late.

    Bad idea? more like Awesome idea. Didn't know you could get a quaife for that power unit! Any idea how much all that weights compared to the v8 + fuel tank?

    Leave a comment:

Working...