Lets see your supension set-ups!

[325is_MadBimmer]

Ok so post a picture of your suspension setup. Also list your suspension/handling mods.

thanks guys.

[Bill 84 318i]

Ground Control sleeves/perches with Bilstein Sports (riding on the bumpstops in the front when at full low).
12mm sway bar in the back (came with none).
New control arms, M3 bushings, and tie rods up front.
Yoko AVS es100's in 225/50.

[Beej '86 325es]

Ground-Control with 350 lb. (FRONT)
ERS 2.5" ID, 6", 500 lb. spring on H&R adjuster (REAR)
Bilstein Sport shocks
ST 22/19mm sway bars
Modified adjustable toe and camber rear subframe
Reinforced trailing arms
Urethane sway bar, control arm, and rear subframe bushings
RD front/rear strut bars
Schneller HD rear shock mounts

...probably would have been easier to just give the link to my mods:

http://www.siue.edu/~bpearsa/bimmer/mybimmer/

[rs4pro3]

85 318i
Spax 60mm springs
12mm rear sway bar

88 325is
Bilstein M-tech shocks
Racing dynamic springs
21mm cabrio front bar
M3 front end link and Ground control mounting tabs on the strut housings
Erik Lucas Rear strut bar
Unknown front strut bar
205/50/r16 tires
I'm working right now on installing the bilsteins on the car so the ride height shot is from before. The ride height should be the same after except for I pulled the front spring pads but they were completly shot and almost paper thin.



Comparo shot
I'll change the picture next week once the bilsteins are on.

[modifiede30]

Ground control coilover setup with 350/450 Eibach springs
Koni adjustables front and rear
Aluminum rear shock mounts with urethane bushings
Offset urethane control arm bushings
Adjustable camber plates
Eibach front strut bar
M3 rear sway bar
Stock bar up front with adjustable links
15" wrapped in Falken Azenis tires

[Ryan Stewart]

Racing Dynamics Blue, sways and all. Good luck finding it.

At Rest.:

[M3 Ryan]

Bilstein Sports
RD Sways
Suspension Tech Springs
Urathane Bushings
Aluminum Control Arms
Offset front camber bushings
Offset front crash mountsM-Coupe Diff Cover (stiffer busihing)
Urathane Eccentric trailing arm mounts for camber/toe
Urathane subframe bushings
Urathane swaybar mounts
Adjustable sway bar links
Rolled Fenders to clear tires
245/35/ZR17 Goodyear Eagle F1 Tires

[OOMPH!]

Not the best pic, but I have GCs (they're all the way in the pic) and Koni Adjustables. Also have a Sparco Strut tower bar.

[Digitalwave]

AP Sporttuning 60mm front/40mm rear drop springs
AC Schnitzer-revalved Bilstein Sport front shocks
AP Sporttuning rear gas shocks
E36 cabrio rear shock mounts
brand new factory front strut mounts
removed spring pads all around
LUKAS rear strut bar

[BMW BMXER]

Eibach Springs (dunno which ones)
Bilstien Sports

The end.

[KenC]

Factory 1984 318i set-up:

:nice:

[Bryson]

ground controls 375 front/ 475 rear
bilstein sports :? konis in a couple weeks
racing dynamics sway bars w/ urethane bushings (isn't it standard)
urethane rear subframe bushings
e36 RSMs

somebody want to find a picture from the side of my car?

[e9nine]

GCs
Koni SAs
15" wheels & tires...(tires so smooth they're not roadworthy)

[nando]

I'll get pics tomorrow (haven't taken any new ones in ages, and my car is really dirty!), but here's my current setup:

H&R sport springs (no pads)
Koni adjustables
M3 offset CA bushings
polyurethane subframe, trailing arm, and differential bushings.
E46 M3 convertible RSMs
Eric lukcas rear brace
Weichers Sport front strut brace

all with bottlecaps and yokohama ES 100's in 205/60-14, soon to be demoted to winter wheels by a set of 15" BBS :)

[kansas-ix]

nando; they make a strut brace for the ix I had no idea, where did you get it from?