Brianna GPs SpecE30 build for KishG

[kishg]

When flipping the housing around, am I correct to assume the lines need to be flipped so they are in the same holes they were originally in? Or does this matter?

good question, we haven't installed the cooler yet. i'm thinking they do need to go in the same hole. i think there's a valve of some sort in the housing.

[kishg]

coming down the home stretch:

motor is in!!

[BrewCity11]

When flipping the housing around, am I correct to assume the lines need to be flipped so they are in the same holes they were originally in? Or does this matter?

Doesn't matter which line goes where, but if you wanted, you could make it so they went to the same holes.

[JRKOUPE]

track car

......great progress.........good stuff.

.

[kishg]

......great progress.........good stuff.

.

no doubt.. when are you coming by to see it?

[JRKOUPE]

no doubt.. when are you coming by to see it?

Ive just been bu
sy


new house.....my wife's health......playing w/ the cars.... etc....

I just havent had the time to just h
hang and BS like I love to do....

Can you tell me... or e me your sched this season?..DE and /or race?...did you get your license?....I assume not yet.

[kishg]

i'll pm you my schedule. license is in the mail (or so they say ) :)

[BrewCity11]

Kish keeps beating me to the updates with his iPhone pics!

Levent and I rolling the front end over


Dropping the shell


And shes in


Smile of approval


I didn't bother with welding the stud and braket for the overflow, so i just drilled two holes and bolted them from the wheel well






We have a few rolls of oem fabric tape, so i finished up the wiring, and wrapped them up. Came out niiiice. I still have a hard time dealing with the fact this is a track car and not his DD.




The rest are just a few end of day pics i took.








The remainder of the wiring (elec fan, oil temp, oil press, etc) will be loomed and brought inside through where the a/c pipe came in. I also wired up the electric fan using oem bmw connectors, so if the rad ever needs to come out, we can just dissconnect and pull it out as a whole.

Also, our detailer will hopefully be by this weekend to turn this pink back into red :)

And yes, we have a grocery cart.

[iwantspeed]

looks great guys
keep the updates coming.

[JRKOUPE]

kish love

"I still have a hard time dealing with the fact this is a track car and not his DD"


me too......lol


do you have any extra of that oe fabric tape?......id buy a roll if I could.

[z31maniac]

Excellent work as always gentlemen.

[selturk]

looking guten..

[BrewCity11]

Thanks guys

Little closer each day to completion.
Mounted up the brake ducting. I used some OEM hose clamps. On the center one, drilled a hole through it and the frame rail and used a self tapper to secure.




Instead of installing a level sender that won't be used anyways, i went with the cap used on the bottom of an M42 overflow.


Our detailer came by today as well. Some before and during pics.










And here she is at the end of the night. The finish is still pretty rough, but at least its all red and shiny now :)

[SamE30e]

By OEM fabric tape, do you mean hockey tape? lol

Looks wicked guys.

[BrewCity11]

By OEM fabric tape, do you mean hockey tape? lol

Looks wicked guys.

Yeah, looks the same, though not sure if hockey tape has all of the same qualities though.

http://www.tesatape.com/industry/products/tesa%28r%29_51025.html