A trip down memory lane...89' 325is + S52 inside!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Rich@GTBPerformance
    replied
    Wow, looking good!

    Leave a comment:


  • gkurey
    replied
    Quick update...finally got some time to do a little bit of painting of that (IMO) nasty chrome trim....hello shadowline! Didn't take many pics, but I have two...in progress and final product. I did them on the car...I probably should've taken them off, and I won't be very surprised if they flake a little...I had a hard time getting an adequate scuff on the trim without hitting my paint. We will see...for now, I think it looks awesome for the time spent. Pics:

    All masked up and first layer down


    Finished!


    Cheers,
    -G

    Leave a comment:


  • gkurey
    replied
    Hey all,

    Got on with another mini-project I've been meaning to start...paint refurb! Most of the top surfaces are pretty oxidized; until today. I got a nice Griot's random orbital buffer from my parents for Xmas, but haven't had a good place to use it until I recently moved into a house with a garage. Since the major mechanical work is all done, my wife and I decided to give the car a good cleaning in and out, and then followed by some paint care.

    To put it shortly, I'm amazed at how it came out! The buffer was awesome coupled with some Meguiar's Fine Cut Cleaner and Gold Class wax. I'm more than impressed with my car's original 22 year old paint. I may go back with some more heavy duty polish to try and get out some of the larger scratches...but with white it easy to hide them so we will see.

    Here are some before and after pics of the hood:

    Before


    Before again


    After!


    The buffer! 6"


    Look at the reflection...there was no reflection before! At least not one where you could discern my hand in.


    Well worth the effort!


    My wife did an awesome job helping me clean the inside...my carpets used to be filthy!


    All in a weekend's work! Stay tuned for more updates.

    Leave a comment:


  • parkerbink
    replied
    Great build. Can't believe I missed it all this time.

    Thanks for sharing!

    Leave a comment:


  • gkurey
    replied
    Thanks...I have these super tall tires which I think look a little goofy, and it looks more awkward the lower I go, haha. Also the S52 oil pan hangs LOW...but I will man up and spin it down once I get new wheels/proper tires.

    Leave a comment:


  • ethrtyiS
    replied
    awesome job man, its coming together very nicely. just needs a bit more low. :up:

    Leave a comment:


  • gkurey
    replied
    Another cool little tidbit...not exactly project related, BUT....it is relevant to my e30.

    My dad happened to find the original brochure for this thing! It's pretty awesome and in great shape. Just another bit of e30 history to hang on to...here are a few shots I took while looking it over.









    Enjoy!

    Leave a comment:


  • TrentW
    replied
    Have the mounting hardware but was looking for a mounting template also, but I don't think one actually exists. I've heard from others who have used the 3M tape on the top edge, think I'll go that route also.

    Leave a comment:


  • gkurey
    replied
    Thanks, TrentW. To install the is skirts properly, you need a hardware kit and a template to drill up your precious e30. I got the hardware but couldn't find the template/didn't really look around for it. I decided only to use the bottom 4/5 clips on the lower edge and to use 3M double sided body panel tape on the top edge. Nothing else, and they are on there very firmly. You could throw a self-tapping screw/sheet screw on each end to be safe. IMO this is better because its fully reversible if you want to get rid of them.

    Leave a comment:


  • TrentW
    replied
    Nice work there sir. Wish my subframe job was as easy as yours!

    I'm reassembling my car after a total repaint and also need to install the "is" skirts, but initially am a little confused on the installation process. Did you happen to take any photos of the install by chance?

    Leave a comment:


  • gkurey
    replied
    Hey guys...pretty good update here.

    So...recently relocated and I now have a garage again! Given the new work space, I decided to take care of a few things on the e30. This weekend I did the dreaded rear subframe/RTAB bushing replacement. I was really expecting it to be hard, given what I had read on here. I was expecting my subframe to be stuck to the car....for the studs to break/sieze, to not be able to press the bushings easily, etc.

    Well, I'm happy and lucky enough to report that everything went well, and surprisingly easy! I guess it helps that for 90% of the car's life it was in the deserts of NM and didn't have any corrosion! Lucky for me! This round of work was done because of a passive rear steering issue that became very noticeable after refreshing the front suspension. I decided that with the front being stiff and new, and sloppiness of the rear became exaggerated, and it felt almost as if I was towing an out of control trailer or something....the rear had a mind of its own! Scary at anything over 40 mph.

    I'm proud to say the new subframe bushings, and more likely, the new RTABs have solved this instability and the car feels great! Here are a few pictures to chronicle my adventures:

    I'll spare the tear down pics...but here is the nasty subframe off the car


    Junky RTAB


    I used all new OEM rubber bushings...I figured I pretty much just have time to drive on the street so why spend more...


    Props go out to KenC...I copied his homemade tool. I sourced the parts from Lowe's motorsports aisle, haha! Total tool cost...less than 4 dollars. Pulled the bushings in with the aide of warm soapy water. Burned the old ones out!


    A conflagration it was, too.


    The apparatus to pull in the new subframe bushings. I already owned the 2 arm puller (8") and had the aluminum plate lying around. Spent a dollar on the pvc section I needed to gain the required clearance to pull the bushing all the way in. Also aided by hot soapy water.


    Great success!! /borat


    No pics...but while I was in there, I replaced the soft brake lines over the subframe and also did new ebrake shoes.

    And for some more interesting items...I did some legit cosmetic mods!! About a month ago, I put on an is lip and pair of matching skirts. They came back from paint, but the complete painting of the skirts looked a little silly...so I went back and 'blacked' out the nasty white edges. You'll see below. I also painted my mirror bases black. Next up is shadowline trim and other little things. Saving up for some new wheels....here are the rest of the pics:

    Skirt before


    Skirt after...way cleaner IMO


    Mirror before


    Mirror after


    And, the new look!


    My favorite new pic of this thing!!


    Hope you guys enjoyed reading...I'll keep it up as I do more.

    Leave a comment:


  • gkurey
    replied
    Wow! 4 months later, I have a small update...I've been busy doing military stuff but am back in the saddle again. It's been nice to drive the e30 every day and it's performing well, all my hard work has paid off. Since I last posted, I literally haven't done anything until today.

    I've crossed the 1 year mark as having this car as a project and I decided to dress it up a little...do two items that I've been wanting for a while in celebration of a year and counting. I got a shift knob made by robsgotit. He sells them in the parts FS section...I got the package today after paying him late last week...fast shipping and good packaging. The knob is lathed by him and they are made to order. I was impressed by his delivery time considering it wasn't even made yet when I paid him. The price is awesome too. Going into my purchase I couldn't really tell how big the knob may be or what the exact one I ordered looked like....so I took a bunch of pics of the installation. BTW, the knob feels great in hand, and all the work it great! Thanks Rob.

    As I opened the package right after work, forgive the other stuff in the shot:


    A macro on a better background...I like the light tooling marks!


    Out with the old...


    Compare size...this is his "small" knob.


    In with the new!


    Looks and fits great. FYI, the set screw completely goes past the knob surface when tight so there's nothing hanging out!

    Next, I finally cleaned up my wiring harness from the swap. I know a lot of people run the 318 harness covers, but I have been having a hard time finding a clean one. I ordered some oversize loom to clean up my harness. It came out awesome for spending 10 bucks counting shipping! Pics:

    Before:



    After! No longer ashamed of my engine bay...



    That's all for now. I'm having a few more goodies/changes arrive soon, so stay tuned. This is the last time I post a picture of the car looking just like this. I can't wait....

    Last edited by gkurey; 04-11-2011, 04:09 PM. Reason: poor grammar :(

    Leave a comment:


  • red325
    replied
    Great build man, maybe some day I can have that s50 power under my hood.

    Leave a comment:


  • kishg
    replied
    very nice build!

    Leave a comment:


  • Dirtboy
    replied
    Very nice build! I wish I could weld as good as you. Makes me miss my e30.

    So you like the 2.93? I went crazy with my e30 and put a 4.10lsd in it. You want to talk about short gears... lol But my e30 has a rebuilt m20 in it so it needs all the help it can get.

    Leave a comment:

Working...